Alarm Operation
The iP16 Audio System for iPhone/iPod features “Sure Alarm”. Provided you have installed the 4 “AA” batteries, if a power failure occurs or the AC adaptor is accidentally disconnected, the alarm will still wake you up.
This unit also features Gentle Waking, which gradually increases the volume of whatever alarm you set.
NOTE: TO WAKE TO iPhone/iPod, YOUR iPhone/iPod MUST BE PROPERLY DOCKED AND OFF (NOT IN PLAY MODE) OR NO iPhone/iPod ALARM WILL SOUND.
Setting the Alarm |
|
|
|
|
| |
1. | Press and hold the | button until the hour display flashes. Press the | or Button until the desired alarm hour is | |||
| displayed. Remember to set the correct AM or PM time, indicated by PM on the display; there is no AM indicator. | |||||
2. | Press the | button again, then press the | or | Button until the desired alarm minute is displayed. | ||
3.Press the 
button again to exit the setting mode. You should hear 2 beeps indicating the alarm is set.
Note: Once you set the alarm time, the alarm will be automatically armed, indicated by the 
icon. To disarm the alarm,
press the 
button . The
icon will disappear and the alarm will not sound at the set time. Note: Make sure to adjust volume level for a comfortable wake up volume.
4.When the alarm is sounding, the 
icon will flash.
•To snooze during the alarm, press the Snooze/Dimmer Button. The alarm will be silenced for 9 minutes, then come on again.
•To turn the alarm off and reset it to come on the next day, press the 
Button.
5.If the alarm is not turned off once it sounds, it will play for one hour then turn off automatically. This cycle will repeat every 24 hours unless the controls are changed.
Note: Please make sure your iPhone/iPod has enough songs to play for one hour, otherwise please set the iPhone/iPod repeat mode to ON.
Note: If there is no iPhone/iPod present or there is no music detected on the iPhone/iPod at alarm time, the iP16 will automatically switch to buzzer alarm.
Sleep Operation
1.When the iP16 is off or while listening to your iPhone/iPod, press the Sleep Button located on the back of the unit to enter sleep mode. The Sleep Icon will appear on the display to indicate it is in sleep mode. Sleep mode has a Gentle Sleep feature which gradually lowers the volume before it shuts off.
2.You can adjust the sleep timer from 90, 60, 30 or 15 minutes by pressing the Sleep Button again. The unit will automati- cally turn off after the selected time.
3.When the display changes back to show the real time, pressing the Sleep Button once will show the sleep time remaining. Pressing it again will change the sleep time to the next lowest increment.
4.The iP16 has an independent volume setting for sleep mode so you can adjust the sleeping volume without affecting the alarm volume. Press the 
and Buttons to adjust the sleep volume. The sleep volume will remain at that level the next time you enter sleep mode until controls are changed.
5.To stop listening at any time, press the 
button to turn unit off.
Snooze/Dimmer Operation
1.Press the Snooze/Dimmer Button after the alarm sounds. The alarm will go off and will come on again in about 9 minutes. You may repeat this cycle several times during the one hour alarm cycle.
2.During normal operation with the AC adaptor, press the Snooze/Dimmer Button to control the brightness (high, medium, low and off) of the LCD display. During portable operation with 4 “AA” batteries, the LCD backlight will display for about 5 seconds when you press the Snooze/Dimmer Button once.
6 | 7 |
