Charging your iPhone/Pod
Note: Please make sure you are using the correct insert for your iPhone/iPod and that it is properly docked into the iP40. Failure to do so may damage your iPhone/iPod.
1.While your iPhone/iPod is docked in the unit and the unit is connected to AC power, it recharges (until fully charged). Note that other
Listening to iPhone/iPod
1.Dock the already playing iPhone/iPod, the iP40 will automatically turn on and you will hear the music playing from your iPhone/iPod.
Note: If the playing song/music loudness is too low on the iPhone/iPod itself, iP40 may not detect iPhone/iPod is in play mode. Press the 
Button to play it. iPhone/iPod icon will turn on to show iP40 is running under iPhone/iPod mode.
2.When the iPhone/iPod is docked and in standby mode, press the 
Button to play it.
3.Press the 
Button again to pause play; press again to resume it.
4.To skip to different music tracks or to perform high speed music search within a track, you may press the << or >> buttons on the top panel of the iP40. These controls have the same function as the l<< or >>l buttons on your iPod click wheel or your iPhone display.
5.Press the 
or 
Button to adjust the system volume.
6.Press EXB Button located on the rear of the unit to enhance the bass sound.
7.To turn off the unit, press the 
Button. iPhone/iPod will continue charging while in the dock.
Listening to FM Radio
Setting up Antenna
Extend wire antenna fully for best reception. Do not strip, alter or attach to other antennas.
Tuning and Playing the Radio
1.Press the Radio/Aux Button to turn the iP40 on. The radio icon in the lower part of the display will appear.
2.Press the << or >> Button to tune the radio to a desired station. Press and hold briefly to scan to next clear station.
3.Press the 
or 
Button to adjust the system volume.
4.Press the EXB Button located on the rear of the unit to enhance the bass sound.
5.To turn off the unit, press the 
Button. iPhone/iPod will continue charging while in the dock.
6
