Getting Started
Thank you for purchasing the iP49. Designed specifically to work with your iPhone and iPod, this system provides high quality audio performance that brings out the best in your music and lets you wake and sleep to it anywhere.
Please read this instruction carefully before operating the iP49 and keep it for future reference.
Connect AC Adaptor
Connect the AC adaptor cable plug into the DC jack on the back of the system, then plug the AC adaptor into a working outlet. While connected to AC power, the iP49 will charge your docked iPhone or iPod as well as the internal lithium ion battery until fully charged.
Installing/Replacing the Clock Backup Battery
This model is equipped with a battery back up circuit that will maintain the time and alarm time settings, as well as the radio station preset memory settings and EQ settings, in the event of a temporary power interruption. The battery back up circuit will also operate the buzzer alarm to wake you up even if the power is out at the selected wake up time. The battery back up circuit requires one CR2032 lithium battery, included. The lithium battery was included in the package with this instruction manual.
To install the backup battery:
1.Make sure unit is connected to AC power, otherwise you will lose settings during battery installation.
2.Close the lid and place the unit
3.Remove the battery compartment cover by sliding it in the direction of the arrow as illustrated.
4.Insert the included CR2032 battery in the backup battery compartment with the “+” side facing up, as illustrated.
5.Replace the battery compartment cover. Place the unit right side up, open the lid, and confirm that the backup battery
icon | is not flashing in the display. |
When the backup battery is getting weak the Low Backup Battery Indicator will begin flashing in the display. When you see this flashing indicator you should replace the backup battery as soon as possible. Purchase a replacement CR2032 battery, available wherever batteries are sold, and follow steps 1 through 4 above to install the replacement battery.
IMPORTANT: When replacing the backup battery be sure to have the unit connected to the AC outlet to maintain all of your settings, otherwise it will be necessary to reset the time, alarm time, radio presets, and EQ settings after the battery is replaced.
Note: Make sure you dispose of battery properly (see your local regulations).
WARNING: Lithium batteries can explode or cause burns if disassembled, shorted, recharged, exposed to water, fire, or high temperatures. Do not place loose batteries in a pocket, purse, or other container containing metal objects, mix with used or other battery types, or store with hazardous or combustible materials. Store in cool, dry, ventilated area. Follow applicable laws and regulations for transport and disposal.
3
