![](/images/new-backgrounds/1192668/19266817x1.webp)
FITTING AND REMOVAL OF BASE
The monitor is supplied complete with a stand. If you prefer to wall mount the monitor, please follow the instructions below to remove the stand. Be sure to include the stand with the monitor if it is necessary to return the unit.
CAUTION Put the monitor on a stable surface. The monitor may cause injury or damage if it falls or is dropped.
Do not give a strong impact to the monitor. It may cause damage.
Unplug the monitor before removal or installation to avoid electric shock or damage.
ProLite B2403WS
<Installation>
APut a piece of soft cloth on the table beforehand to prevent the monitor from being scratched. Lay the monitor flat on a table with front face down.
BInsert stand into the monitor as shown in figure as action ‘2’.
CTo secure stand, gently lower base as shown in figure as action ‘3’ until stand locks.
ProLite E2403WS
<Installation>
APut a piece of soft cloth on the table beforehand to prevent the monitor from being scratched. Lay the monitor flat on a table with front face down.
BThe
CInstall the
<Remove>
A Put a piece of soft cloth on the table beforehand to prevent the monitor from being scratched. Lay the monitor flat on a table with front face down.
BPress release button as shown in figure as action ‘2’.
CKeeping release button pressed, lift base as shown in figure as action ‘3’.
DRemove the stand.
<Remove>
A Put a piece of soft cloth on the table beforehand to prevent the monitor from being scratched. Lay the monitor flat on a table with front face down.
B Hold down the hooks outside and pull the
ENGLISH
BEFORE YOU OPERATE THE MONITOR 5
9 | 2007/09/03, 9:54 |