Iiyama LM704UT user manual Location of Controls, Connecting Your Monitor

ENGLISH

LOCATION OF CONTROLS

< Front > < Back >

�

	�	�
	�
	�
	�
A Power Indicator		G Signal Cable for D-Sub Connection (Fixed)
B Power Switch		H AC Connector (AC IN)

C+ Button

D– Button

EMenu Button

FExit Button

CONNECTING YOUR MONITOR

AEnsure that both the computer and the monitor are switched off.

BConnect the computer to the monitor with the signal cable. (See page 13 for CONNECTOR PIN ASSIGNMENT.)

CConnect the Power Cable to the monitor first and then to the power supply.

NOTE

nThe signal cables used for the connection vary by the type of computers you use. An incorrect connection may cause serious damage to both the monitor and the computer. The cable supplied with the monitor is for a standard 15 pin D-Sub connector. If a special cable is required please contact your local iiyama dealer or regional iiyama office.

nFor connection to Macintosh computers, contact your local iiyama dealer or regional iiyama office for a suitable adaptor.

nMake sure you tighten the finger screws at each end of the signal cable.

6BEFORE YOU OPERATE THE MONITOR