INSTALLATION OF TILT AND SWIVEL STAND
The monitor is designed to be used with the stand installed. Be sure to install the stand before operating the monitor.
CAUTION n Install the stand on a stable surface. The monitor may cause injury or damage if it falls or is dropped.
nDo not give a strong impact to the monitor. It may cause damage.
nUnplug the monitor before installation to avoid electric shock or damage.
AEnsure that the monitor is switched off.
BCarefully turn the monitor on its side or upside down.
CLocate the cavities at the bottom front of the monitor.
DInsert the pegs on the stand into these cavities. Push the stand forward until the stand locks in place.
ETo remove the stand, hold the bottom of the stand, then push it out.
ENGLISH
BEFORE YOU OPERATE THE MONITOR 5
