IKEA FC213/18 manual Positioning

ENGLISH 13

Positioning

This appliance can be installed in a dry, well ventilated indoor (garage or cellar) also, but for optimum performance install this appli- ance at a location where the ambient tem- perature corresponds to the climate class in- dicated on the rating plate of the appliance:

Climate class	Ambient temperature
SN	+10°C to + 32°C
N	+16°C to + 32°C
ST	+16°C to + 38°C
T	+16°C to + 43°C

Electrical Connection

Caution! Any electrical work required to install this appliance should be carried

out by a qualified electrician or competent person.

Warning! This appliance must be earthed.

The manufacturer declines any liability should these safety measures not be ob- served.

12

3

4

5

Important! The wires in the mains lead are coloured in accordance with the following code:

	Green and Yellow:	Earth
1
	Brown:	Live
3
	Blue:	Neutral
5

As the colours of the wires in the mains lead of this appliance may not correspond with the coloured markings identifying the termi- nals in your plug, proceed as follows:

1.Connect the wire coloured green and yel- low to the terminal marked either with the

letter “E“ or by the earth symbol or coloured green and yellow.

2.Connect the wire coloured blue to the ter- minal either marked with the letter “N“ or coloured black.

3.Connect the wire coloured brown to the terminal either marked with the “L“ or col- oured red.

4.Check that no cut, or stray strands of wire is present and the cord clamp 4 is secure over the outer sheath.

5.Make sure the electricity supply voltage is the same as that indicated on the appli- ance rating plate.

6.Switch on the appliance.

The appliance is supplied with a 13 amp plug fitted 2 . In the event of having to change the fuse in the plug supplied, a 13 amp ASTA approved (BS 1362) fuse must be used.

Warning! A cut off plug inserted into a 13 amp socket is a serious safety (shock)

hazard. Ensure that it is disposed of safely.