ALLEN&HEATH iLive Reference Guide AP6526 iss.3 31
Using the Master MIX key - View all sends feeding one mix.
1. Press MIX on the mix master strip. View the current settings on the
channel strip LCDs and faders/rotaries.
2. To assign individual channels to the mix, hold down the ASSIGN key
and then press channel MIX keys to toggle them on or off. The strip
LCDs display an ‘ON’ icon when assigned. To assign all channels on
or off, hold down ASSIGN and then press the master MIX key to
toggle all on or off.
3. To set individual sends pre or post-fade, hold down the PRE/POST
key and then press channel SEL keys to toggle them pre or post.
The strip LCDs display a ‘PRE’ icon when set to pre-fade. To set all
sends pre or post, hold down PRE/POST and then press the master
SEL key to toggle all.
4. For aux, FX and matrix mixes, the faders or rotaries become the
sends depending on the setting of the ‘Send on Rotaries’ button in
the ROUTING screen with master strip SEL active. If a rotary send,
then the faders remain as channel faders. For groups and DCAs (no
send levels), the faders and encoders remain unaffected.
5. For stereo aux and matrix sends, the rotaries become the PAN
controls. If a stereo send is configured for rotary levels then the
second (PAN) function as accessed by holding down the ROTARY
SHIFT key while turning the encoder. In this case the strip LCD
displays two dials.

IEM2

AUX
FADER
CH
STEREO
SEL
MIXMIX

3

IP
AUX
PRE
PAN
LR

4

IP
AUX
PRE
PAN
LR

2

IP
AUX
PRE
PAN
LR

1

IP
AUX
PAN
LR
ASSIGN
PRE/POST FADE
ASSIGN
PRE/POST FADE
ROTARY SHIFT
SEL
MIXMIX
SEL
MIXMIX
SEL
MIXMIX
SEL
MIXMIX

4

IP
AUX
PRE
PAN
LR
LEV
FADER
CH
Current mix
status
This channel
is assigned
Master
This channel is
not assigned
This channel is
set post-fade
This channel is
set pre-fade

Fader mix

Send levels on faders. Pan on
rotaries if stereo mix.

Rotary mix

Send levels on rotaries. Pan on
shifted rotaries if stereo mix.
1
3
2
4
5

Select mi

x

Assign channels

Set Pre/Post fade

Adjust send levels

Adjust stereo pan