OPERATING GUIDE
7.SELECT SPEED
This operation will allow you to adjust and select the Duplication Speed for the three different disc types: CD, Audio CD, and DVD.
a.Press either button , to navigate the menu. 7. SELECT SPEED, and press OK
b.You will see three disc types: CD, Audio CD, and DVD. Press either button , to select a disc type and press OK to confirm your selection.
c.Press either button , to select the burning speed.
7.Set Burn Speed
Press OK
&
,
[Burn Speed]
CD = 52
Press | Setting normal | |
data CD | ||
OK | ||
burning speed | ||
|
,
,
[Burn Speed] Audio CD = 40
[Burn Speed] DVD = 8
Setting Audio
Press | CD burning |
|
|
OK | speed |
|
|
Setting DVD | Note: This is only | ||
Press | burning | available on DVD | |
OK | speed | ||
|
| duplicators |
|
8.SELECT SOURCE
Use this function to set a Optical Drive or Hard Drive Disk as the Master Reading Source.
a.Move to 8. Select Source and press OK.
b.Press , to select either a HDD or an Optical Drive with assigned number as the reading source.
8.Select Source
Press OK
move, to select
Source Drive ==> HDD:ST380021A
Source Drive ==>
Press OK to finished setting
Note: If HDD was selected as Source, then please follow 12.1 Select Image ‘s instructions to learn how to
select image files as your reading source..
Note: Each Optical Drive will be assigned a Drive # according to their installation sequence. If there is no HDD installed, then Drive#1 is set as the Reading Source.
