ILY Enterprise CD/DVD Duplicator user manual Set Up, Image Manager

	10.7	System Info.	This feature provides information of the duplicator, such as the Controller
			model number, Buffer memory capacity, and Firmware version.
	10.8	Update BIOS	This operation will update your duplicator’s software. You need to insert
			manufacturer’s certified update CD.
11	SET UP
	11.1	Power On Time	You can set the system warm up time from 5 sec to 255 sec after the system
			power is turned on.
	11.2	Auto Start	This operation will allow the duplicator to automatically execute copying
			once your master source disc and all of writer trays are fulfilled with recordable
			discs. You can turn the setting off or set the amount of seconds (1~99) it
			would take to activate this feature. To execute this function, you have to set
			the operation mode of COPY, TEST, VERIFY, COPMARE, COPY&VERIFY,
			COPY&COMPARE.
	11.3	Startup Menu	You can select which function in the menu will be shown first when you turn on
			the duplicator.
	11.4 Write Method		You can select which mode to duplicate CD among “DAO”, “SAO”, and “TAO”.
			The default mode is “DAO,” which means Disc at Once.
	11.5	Button Beep	You can choose whether to hear a beep when you press a button.
	11.6	Clear Setup	Reset all of the operations back to manufacturer’s default.
12	IMAGE MANAGER		This function will show you how to perform various Hard Drive related
			operations. If your duplicator does not have a HDD installed, the system
			menu will not show this function.
	12.1	Select Image	Use to select an Image file as a Source to be copied to the discs.
	12.2	Disc -> Image	Use to copy a Source Disc to HDD to save as an Image file.
	12.3	Reader Speed	When you go to this function (12.2 Disc -> Image function), you can set the
			Reading Speed of the master source disc.
	12.4	Image Info.	Checks the image file information and file size
	12.5	Delete Image	Use this function to delete an image file in HDD. If the file is selected as the
			source file, you will not be able to delete it unless you go back to 12.1 to re-
			select the image.
	12.6	HDD Info.	Checks the information in HDD, such as the number of discs stored on the
			HDD and the amount of space left in the HDD.
	12.7 Format HDD		This feature will allow you to format the HDD. However, you will not be able to
			format the HDD if the HDD image was selected as the source.

Copyright © 2005 by ILY Enterprise, Inc. All Rights Reserved.