OPERATING GUIDE
11. SET UP
Use this function group to change the manufacturer’s default setting.
11.1Power On Time
You can set the system warm up time from 5 sec to 255 sec after system power on.
a.Select 11. Set Up and press OK
b.Select 1. Power On Time and press OK
c.Press , to increase or decrease the seconds.
[Setup]
1. Power On Time
pressOK
Power On Delay 15 seconds
press , to set
seconds
11.2 Auto Start
This operation will allow the duplicator to automatically execute copying once you place your source disc in your master source drive and recordable discs in any of your writer trays. You can disable the auto start function or turn it on along with the time
[Setup]
2. Auto Start
press OK
Auto Start
3 seconds
press , to set seconds
Note: If you set the function off , the LCD screen will not show how many blank discs are detected in writer trays.
11.3Startup Menu
3.1.1You can select which function in the menu to see first when you turn on the duplicator.
[Setup]
3. Startup Menu
press OK
[Startup Menu] 1. Copy Disc
move , to select function
11.4 Write Method
You can select which mode to duplicate CD among “DAO”, “SAO”, and “TAO”. The default mode is “DAO”, Disc at Once. Unless you understand completely what they mean, we strongly suggest you to set it as “Disc at Once”
[Setup]
4. Write Method
press OK
Write Method
DAO
move
,
to select
11.5 Button Beep
You can choose whether to hear a beep when you press a button or not.
[Setup] | press OK | Button Beep | |
5. Button Beep | ON | ||
|
11.6 Clear All
Reset all of the operations back to manufacturer’s default settings.
move , to select
ON/OFF
[Setup]
6. Clear Setup
press
OK , clear all setting you have done and return back to manufacturer’s default setting
Copyright © 2005 by ILY Enterprise, Inc. All Rights Reserved.
