Assembly
Make Things Easier for Yourself!
Everything in this manual is designed to ensure that the weight rack can be assembled success- fully by anyone. However, it is important to real- ize that the versatile weight rack has many parts and that the assembly process will take time.
Most people find that by setting aside plenty of time, assembly will go smoothly.
Before beginning assembly, carefully read the following information and instructions:
•Assembly requires two people.
•As you assemble the weight rack, make sure all parts are oriented as shown in the drawings.
•For help identifying small parts, use the PART IDENTIFICATION CHART on page 5.
The following tools (not included) are required for assembly:
• Two adjustable wrenches
• One rubber mallet
• One standard screwdriver
• One Phillips screwdriver
•Place all parts in a cleared area and remove the packing materials. Do not dispose of the packing materials until assembly is completed.
•Tighten all parts as you assemble them, unless instructed to do otherwise.
•Lubricant, such as grease or petroleum jelly, and soapy water.
Assembly will be more convenient if you have a socket set, a set of
1.Press 2 1/2” Square Outer Caps (27) onto the ends of the Right and Left Bases (1, 3).
Attach the Right and Left Bases (1, 3) to the Center Base (2) using four 3/8” x 3 1/2” Bolts (31) and four 3/8” Nylon Lock Jamnuts (29). Do not tighten the
Nylon Lock Jamnuts yet.
2.Identify the two Rear Uprights (8), which are slightly shorter than the Front Uprights (not shown).
Attach the Rear Uprights (8) to the Left and Right Bases (1, 3) using four 3/8” x 3 1/2” Bolts (31) and four 3/8” Nylon Lock Jamnuts (29). Do not tighten the Nylon Lock Jamnuts yet. Make sure the Uprights are oriented exactly as shown, with the adjustment holes on the indicated side near the bottom.
Press a 2 1/2” Square Outer Cap (27) onto the end of the Weight Guide Base (4).
Orient the Foot Plate (5) and the Weight Guide Base
(4)as shown. Attach the Foot Plate and the Weight Guide Base to the Center Base (2) using two 3/8” x 3 1/2” Bolts (31) and two 3/8” Nylon Lock Jamnuts
(29).Do not tighten the Nylon Lock Jamnuts yet.
1 |
| 27 |
|
|
|
| |
|
| 29 |
|
| 31 | 2 | 27 |
| 29 | ||
| 1 | ||
|
|
| |
| 27 | 31 |
|
|
|
| |
| 27 | 3 |
|
2 | Adjustment |
| |
|
| Holes |
|
| 8 | 8 |
|
|
|
| |
| 29 |
|
|
| 31 | 27 | |
| 4 |
| |
| 2 |
| |
| 29 |
| |
| 1 |
|
|
|
| 29 |
|
| 31 | 5 |
|
|
| 3 |
|
6
