Image IMTL315040 user manual Assembly, Make sure that the power cord is not plugged

ASSEMBLY

Assembly requires two persons. Set the treadmill in a cleared area and remove all packing materials. Do not

dispose of the packing materials until assembly is completed.		Assembly requires the included allen wrench
and 90° screwdriver	and your own Phillips screwdriver	and needlenose pliers
			.

Note: The underside of the treadmill walking belt is coated with high-performance lubricant. During shipping, a small amount of lubricant may be transferred to the top of the walking belt or the shipping carton. This is a normal condition and does not affect treadmill performance. If there is lubricant on top of the walking belt, simply wipe off the lubricant with a soft cloth and a mild, non-abrasive cleaner.

For help identifying the assembly hardware, see the drawings below. Note: The assembly hardware and other small parts are packaged in separate part bags. Do not open the part bags until instructed to do so.

		3/4” Screw (39)–6
Wheel Bolt (86)–2	1/2” Silver Screw (107)–1

1” Tek Screw (115)–4

2 1/2” Bolt (56)–2

	2 3/4” Bolt (47)–4	Star Washer (81)–4				Washer (29)–4
1. Make sure that the power cord is not plugged in.
			1	115
With the help of a second person, carefully tip the
treadmill onto its left side. Partially fold the Frame (12) so							97
that the treadmill will be more stable. Do not fully fold
					97
the treadmill until it is completely assembled.

Remove the indicated screws and the two casters from	12
the Base (82). Discard the casters.
	115
Open part bag A. Attach the four Base Pads (97) to the
bottom of the Base (82) with four 1” Tek Screws (115).	Remove
	82
	115
	97
	115
	Remove

6