23
VLAN Configuration
The ports can be assigned as a trunk or access port.
When configuring a trunk port, an Ethertype can be user-defined (a trunk port is also
defined as a provider port based on 8 02.1ad). If an Ethertype value comes in a trunk
port and is different than the user-defined Ethertype, it will be treated as an
unrecognized value and discarded. If configuring the port as an access port, enter a
VLAN ID between 1 and 4,094. Possible priority settings are 0 (lowest priority)
through 7 (highest priority).
NOTE
When an Ethertype or VLAN ID is assigned, the same values ne ed to be configured at the end
device (router, etc) to avoid network configuration pro blems.