2
About IE-iMcV-MultiWay Features and Configuration
The IE-iMcV-MultiWay offers a full feature set including Auto Negotiation, Selective
Advertising, AutoCross, VLANs, SNMP management, loopback testing and OAM. Unit
software updates can be downloaded through TFTP or iView
2
(iConfig view).
IE-iMcV-MultiWay features include:
SNMP manageable
OAM AH
o
IEEE 802.3ah Link OAM for per port monitoring (OAM AH)
OAM AH Functions
o
Discovery
o
Link Performance Monitoring
o
Remote Loopback
o
Fault Detection
o
Link Fault
o
Dying Gasp
o
Critical Event
OAM CFM
o
IEEE 802.1ag Connectivity Fault Management (OAM CFM)
o
OAM CFM Functions
o
Continuity Check
o
Loopback
Speed/duplex modes
802.1q VLAN
Extra tagging with user-defined VLAN tag Ethertype
Ethertype 88A8 as defined in 802.1ad
Command Line Interface capable (CLI)
Telnet
Password assignment via CLI, Telnet or iView
²
DIP Switch configuration for Modes
As a CPE device, the IE-iMcV-MultiWay or IE-MultiWay can behave as a remote to an
iMcV-Giga-FiberLinX-II host when:
1) The iMcV-Giga-FiberLinX-II:
Is connected via the SFP ports on the IE-iMcV-MultiWay
Is configured as a Host
Uses firmware version A1 860-00D1 or higher
2) The SNMP card (if present):
Uses SNMP firmware version 953-00C8 or higher