IMC Networks IE-IMCV operation manual - page 5

1
About the IE-iMcV-MultiWay
The IE-iMcV-MultiWay is a CPE device, available as a modular device providing two
fixed 10/100/1000Base-T copper ports and 2 SFP ports. The SFP ports support fiber
or copper SFPs. As a plug and play device, the IE-iMcV-MultiWay provides several
distinct modes of operation to support a wide range of applications. The IE-iMcV-
MultiWay provides OAM functionality with 802.3ah and 802.1ag supported on each
port. It also supports jumbo frame sizes of up to 10,240 bytes as well as AutoCross
on the copper ports. As an Industrial Ethernet device, it supports an extended
temperature range of -40°C to +85°C. A console port and a DIP Switch bay provide
configuration options.
The IE-iMcV-MultiWay module is a single-wide module.
It can be installed in the following chassis:
• MediaChassis series
• IE-MediaChassis series
The IE-iMcV-MultiWay requires two small form-factor (SFP) modules which provide
greater fiber flexibility in the network environment. The hot-swappable nature of the
SFPs, available in dual strand for Multi Mode and Single Mode, and single strand fiber
types for Single Mode, allow for easy configuration and future upgrading as network
demands evolve. The SFP modules must be MSA-compliant and both DDMI and
non-DDMI are supported. The fiber SFP can support 100Mbps or 1000Mbps; while
the copper SFPs support 10/100/1000Mbps and 1000Mbps.
SFPs are sold separately by IMC Networks and meet Class 1 Laser Safety Standard.