There is no Auto Negotiation in either of the Force modes.

Auto Negotiation (PCI Version)

When connecting two McPC 10/100s between two end stations (devices such as switches, hubs and repeaters), all devices in the media conversion should ideally support, and be utilizing, Auto Negotiation functionality. While it is possible to have Auto Negotiating devices on one side of the media conversion and fixed (non-Auto Negotiating) devices on the other, link LEDs will react differently depending on where a link fault occurs. Therefore, IMC recommends:

•Configuring every device in the media conversion for Auto Negotiation.

•For installations where Auto Negotiation is NOT possible from one end of the media conversion to the other, manually configure all devices for 10 Mbps or 100 Mbps connections.

Transparency (PCI Version)

Transparency is only available when using Auto Negotiation mode; it is not available in either of the two Force modes. When the McPC 10/100 is Auto Negotiating, Transparency treats the connection between the two end devices as if there were no media converters installed. For example, in a typical application where two media converters are installed between two copper-based switches, the twisted pair cables as well as the fiber cable are seen as a single entity. Therefore, if a fault occurs on any segment between the two end devices, link LEDs on the end devices will extinguish.

Transparency is available when the McPC 10/100 is operating in Auto Negotiation mode. Therefore 6 (AN) must be ON and 5 (LFD), 7 (Force) and 8 (10 or 100) must be OFF.

Transparency

Link Fault Detection (PCI Version)

Link Fault Detection (LFD) is only available when using Force 10 or Force 100 mode. It is not available in Auto Negotiation mode. When LFD is enabled and the input link is down at one interface to the McPC 10/100, the transmitter output on that interface will blink. It applies to both network interfaces and to both data rates. If the link at the other interface to the McPC 10/100 is also down, there is no output. LFD causes the Link Up indicator of the link partner to blink.

5

Page 7 Page 9
Page 8
Image 8
IMC Networks MCPC 10/100 There is no Auto Negotiation in either of the Force modes, Auto Negotiation PCI Version
Page 7 Page 9

MCPC 10/100 specifications

IMC Networks has long been a trusted name in the field of networking solutions, particularly known for its commitment to producing reliable, high-quality equipment. One of its standout products is the MCPC 10/100 media converter, a versatile device designed to facilitate seamless communication in networks that require efficient data transmission over various types of media.

The MCPC 10/100 media converter primarily serves the purpose of converting Ethernet signals between twisted-pair cabling and fiber optic connections. With the rise of fiber optic technology, businesses are increasingly adopting such media converters to ensure that they can leverage both the speed offered by fiber optics and the compatibility of traditional copper cabling. The MCPC allows for a smooth transition between these two media types without compromising data integrity or speed.

A key feature of the MCPC 10/100 is its ability to support both 10BASE-T and 100BASE-TX Ethernet standards. This dual compatibility makes it suitable for legacy and modern network infrastructures alike, allowing enterprises to maintain existing systems while upgrading to more advanced technology.

In terms of performance, the MCPC delivers impressive data transfer rates of up to 100 Mbps, facilitating efficient data handling and ensuring smooth connectivity across various network segments. It supports autonegotiation, which enables the converter to automatically adjust to the highest possible connection speed and compatibility.

Another important characteristic of the MCPC 10/100 is its compact design. The unit's small form factor allows for easy installation in various environments, whether it is within a rack or mounted on a wall. Additionally, it features LED indicators that provide real-time feedback regarding power status and link activity, making troubleshooting straightforward.

The MCPC is also designed for durability and reliability, with a robust construction that can withstand the rigors of industrial environments. It often includes features like surge protection and a wide operating temperature range, ensuring that it can function effectively in diverse conditions.

In conclusion, the IMC Networks MCPC 10/100 media converter is an essential tool for any organization looking to enhance its networking capabilities. Its flexibility, high performance, and solid build quality make it an ideal choice for bridging the gap between copper and fiber networks, thus aiding in the efficient management of data transmission across varied infrastructures.
Top Page Image Contents