Setup items | Setting values (Underlined: default) | ||
|
|
|
|
H.264(2) | Ch2 - | Unicast port1(Image) *21 | 1 024 - 50 000 |
| Ch4 |
| (Default: [Ch2] 32016 [Ch3] 32018 [Ch4] 32020) |
|
|
|
|
|
| Multicast address | Available IPv4 address: 224.0.0.0 - 239.255.255.255 |
|
|
| Available IPv6 address: Multicast address starting with |
|
|
| "FF" |
|
|
| (Default: [Ch2] 239.192.0.23 |
|
|
| [Ch3] 239.192.0.25 |
|
|
| [Ch4] 239.192.0.27) |
|
|
|
|
|
| Multicast port *21 | 1 024 - 50 000 |
|
|
| (Default: [Ch2] 37006 [Ch3] 37008 [Ch4] 37010) |
|
|
|
|
| Multicast TTL/HOPLimit *23 *24 | 1 - 254 (Default: 16) | |
|
|
|
|
Important:
*23 • When two or more network interface cards are installed on the PC in use, the network interface card(s) not used for receiving images should be invalidated when displaying images using the multicast port.
*24 • When transmitting an H.264 image via a network, the transmitted image sometimes may not be displayed depending on the settings of a proxy server or a firewall. In this case, refer to the network administrator.
*1 • When this setting is changed, the unit will reboot automatically.
*2 •
*3 • When "On" is selected for "H.264 transmission", the refresh interval may be longer than the set value when any value with an asterisk (*) on the right is selected.
*4 • When "On" is selected for "H.264 transmission" in "H.264(1)" or "H.264(2)", the transmission interval of JPEG images may be longer.
*5 • When "On" is selected for "H.264 transmission" in "H.264(1)", displaying of H.264 images or JPEG images on the "Live" page will be available.
*6 • When "On" is selected for "H.264 transmission" in "H.264(1)" and "H.264(2)", H.264 images are viewable using other devices with each setting.
*7 • When "On" is selected, H.264 images and audio will be transmitted using the HTTP port.
*8 • When "On" is selected, only "Unicast port (AUTO)" will be available for "Transmission type".
*9 • When "On" is selected, H.264 images may not be displayed depending on the number of the concurrent access users and audio data availability, etc.
*10 • When "On" is selected, only IPv4 access is available.
*11 • When "On" is selected for either "H.264(1)" or "H.264(2)", the maximum concurrent access number is equal to or less than 8 users.
*12 • When "Frame rate" is set for "Transmission priority", number of users who can access the unit may be decreased.
*13 • When "Frame rate" is selected for "Transmission priority", this setting is available.
*14 • "Frame rate" is synchronized with "Max bit rate (per client) *". For this reason, the frame rate may be lower than the specified value when any value marked with an asterisk (*) is selected.
*15 • "Unlimited *" is available when "Frame rate" is selected for "Transmission priority".
*16 • The bit rate is synchronized with "Bandwidth control(bit rate)" on the [Network] tab of "Network" page. For this reason, the bit rate may be lower than the value when any value with an asterisk (*) on the right is selected. (☞ Page 54)
*17 • When "Unlimited *" is selected for either "H.264(1)" or "H.264(2)", the maximum concurrent access num- ber is 1 user.
*18 • When "Constant bit rate" is selected for "Transmission priority", this setting is available.
36
