Panasonic WJ-GXE500E manual 4Brightness buttons *2, 5Preset *2, 6Unit title, 7Camera title

!4[Brightness] buttons (*2)

: The displayed image will be darker.

: The adjusted brightness will return to the default brightness.

: Image will be brighter.

Note:

•When the [Brightness] buttons are clicked while the camera is at the preset position, the adjusted bright- ness will automatically be registered for the current preset position.

!5Preset (*2)

Select a preset position from the pull-down menu and click the [Go] button. The camera will move to the selected preset position. When "Home" is selected, the camera will move to the home posi- tion. To activate preset positions and home position, it is required to configure the settings on the SETUP MENU of camera in advance. (☞ Page 41)

!6Unit title

The unit title entered for "Unit title" on the [Basic] tab will be displayed. (☞ Page 30)

!7Camera title

The camera title entered for "Camera title" on the [Basic] tab will be displayed. (☞ Page 30)

!8[Alarm occurrence indication] button (*2) This button will be displayed at an alarm occur- rence, and the channel of alarm occurrence (one of

qto r buttons) will light. When the button is clicked, the button will disappear and the alarm out- put connector will be reset. (☞ Page 13)

!9[Full screen] button

Images will be displayed on a full screen. To return to the "Live" page, press the [Esc] key.

@0[One shot] button

Click this button to take a picture (a still picture). The picture will be displayed on a newly opened window. When right-clicking on the displayed image, the pop-up menu will be displayed. It is pos- sible to save the image on the PC by selecting "Save" from the displayed pop-up menu.

When "Print" is selected, printer output is enabled.

@1[Mic input] button (*3)

Turns on/off the audio reception (hear audio from the unit on a PC).

This button will be displayed only when "Mic input", "Interactive(Half-duplex)" or "Interactive(Full- duplex)" is selected for "Audio transmission/recep- tion" on the setup menu. (☞ Page 41)

When this button is clicked, the button will turn into the button and audio from the unit will not be heard. Audio volume can be adjusted (Low/Middle/

High) by moving the volume cursor .

Note:

• Mic input is available on Ch1 only.

@2[Audio output] button (*3)

Turns on/off the audio transmission (play audio from the PC on the unit speaker).

This button will be displayed only when "Audio out- put", "Interactive(Half-duplex)" or "Interactive(Full- duplex)" is selected for "Audio transmission/recep- tion" on the setup menu. (☞ Page 41)

The button will blink during the audio transmission. When this button is clicked, the button will turn into the button and audio from the unit will not be heard. Audio volume can be adjusted (Low/Middle/

High) by moving the volume cursor .

Note:

•Audio output is available on Ch1 only.

•When a user is using the audio transmission func- tion with "Interactive(Half-duplex)" selected, the [Mic input] button and the [Audio output] button will be inoperable for the other users. When "Interactive(Full-duplex)" is selected, the transmis- sion button is inoperable for other users.

•Possible duration of audio transmission is up to 5 minutes per transmission. When 5 minutes have passed, audio transmission will automatically stop. To turn the audio transmission function on, click the [Audio output] button again.

•When the unit is restarted, the adjusted volume level

(for both the audio transmission and reception) will return to the level that had been set on the [Audio] tab on the setup menu. (☞ Page 41)

•Actual volume level will change in three steps even though the volume cursor can be adjusted minutely.

9