![](/images/new-backgrounds/1194042/194042121x1.webp)
Analog Device Commands
AT*Sn=v | Disable Analog Device Calling Features. Specifies whether supplementary service is | |
| to be disabled. | |
| n=1 | Analog device port 1 (PHONE 1). |
| n=2 | Analog device port 2 (PHONE 2). |
| v=0 | Disable. Recommended for modem/fax calls. |
| v=1 | Enable with default values (default). |
| The following two options are for advanced users only. | |
| v=5 | Enable using same terminal endpoint identifier as data port. |
| v=9 | Enable using separate terminal endpoint identifier. |
| Note: This parameter does not take effect until you restart your DIV AT/A. | |
|
| |
AT*Vn=v | Enable/Disable VoiceMail (North America Only). Specifies whether VoiceMail is | |
| enabled or disabled. | |
| n=1 | Analog device port 1 (PHONE 1). |
| n=2 | Analog device port 2 (PHONE 2). |
| v=0 | Disable (default). |
| v=1 | Enable. |
| Notes: | |
| • If v=0 is selected and voice mail is detected, DIVA T/A automatically enables VoiceMail. | |
| • If the SPID corresponding to an analog device port changes, the parameter will | |
| automatically be reset to 0. Also, if the DIVA T/A is reset to factory profile, the | |
| parameter is reset to 0. | |
| • This parameter does not take effect until you restart your DIV AT/A. | |
|
| |
AT*Wn=v | Call Waiting Support (International version only). Specifies whether support for call | |
| waiting is enabled. | |
| n=1 | Analog device port 1 (PHONE 1). |
| n=2 | Analog device port 2 (PHONE 2). |
| v=0 | Disable. |
| v=1 | Enable (default). |
|
|
|