DIVA T/A ISDN Modem Reference Guide ◆ Page 29
General AT Commands

The following table describes the general AT commands available to the DIVAT/A.

ATIn View Product Information. Displays information about your DIVAT/A.
n=0 Displays hardware code for the DIVAT/A.
n=1 Displays software checksum.
n=2 Reports “OK”.
n=3 Displays software version.
n=4 Displays capability string.
n=6 Displays data pump chipset version.
n=8 Displays Eicon Technology DIVAT/A.
n=9 Display the external COM port plug and play ID of the DIVAT/A.
n=20 Displays product number.
n=100 Displays list of supported countries (phone).
ATO Return Online. In the online data mode, the DIVAT/A is ready to send and receive data,
providing you are connected. Normally, the DIVAT/A remains in this mode until your
computer sends the data mode escape sequence (+++) or until the call is terminated.
Note: This command can only be used when the DIVAT/A is in the online escape mode.
AT@D ATE = Set Date. Sets th e date on th e DIVAT/ A. This com mand is u seful whe n the DIVA T/A
sends the call ID to a telephone with Call Display (North America only).
AT@D ATE? Current D ate. Displays the current date of the system. The format is mm-dd-yy.
AT@TI ME= Set Time. Sets the time on the DIVAT/A. This command is useful when the DIVA T/A
sends the call ID t o a telephone with Call Di splay. The format is hh:mm:ss.
AT@TI ME? Cur rent Time. Displays the current time of the system. The format is hh:mm:ss.
AT@M ENU Activate VT100 Confi guration Tool. The AT@MENU command activates the DIVAT/A
VT100 Configuration tool for configuring basic ISDN parameters.
AT>H s View Help Information. Displays full or partial help for any AT command, where s
specifies which AT command help is requested.
AT>V D View Connection and Link Status Information. This command displays link and
connection status for troubleshooting problems. Your Eicon Technology Customer
Services representative may ask you to display this information.
AT>V DC View Connection Status. Displays the connection status.
AT>V DD Initialization Status Display (North America only). Disp lays informa tion about th e
detection progress, the initialization of the logical channels, as well as auxiliary
information.
AT>V DL View Link States. Displays the link states.
AT>V T View Stored Telephone Numbers. You can display a list of all stored telephone
numbers currently saved on your DIVAT/A.
AT>V X View X.25 Status (AO/DI). Displays the status of the X.25 connection.
AT>? Last AT Command Result Explained. The AT>? Command reports the result of the last
AT command issued. This command is useful for debugging long strings of AT
commands and for determining which command was rejected and why.