Eicon Networks DIVA T/A ISDN Modem manual Isdn Configuration Commands

ISDN Configuration Commands

AT!C1=n	ISDN Switch Type. Specifies the ISDN Switch Type.
	For North American Firmware:
	n=0	National ISDN
	n=1	AT&T 5ESS Custom
	n=9	Auto-detect switch type (default for North America). The DIVA T/A automatically
		determines the correct switch type to be used (National ISDN or AT&T 5ESS
		Custom).
	For International Firmware:
	n=2	EuroISDN (default).
	n=3	Australia - Microlink (TPH1962/TS013).
	n=4	INS-Net64 (Japan).
	n=5	China ISDN.
	n=6	Singapore
	n=11 Australia - OnRamp (Telstra's ETSI service)
	Note: This parameter does not take effect until you restart your DIV AT/A.
AT!C4=n	Enable/Disable Non-Initializing mode (first B-channel) (North American only).
	Specifies whether the first B-channel is set to Non-Initializing mode.
	n=0	Disable Non-initializing mode (default).
	n=1	Enable Non-initializing mode.
	Note: This parameter does not take effect until you restart your DIV AT/A.
AT!C5=n	Enable/Disable Non-Initializing mode (second B-channel) (North American only).
	Specifies whether the second B-channel is set to Non-Initializing mode.
	n=0	Disable Non-initializing mode (default).
	n=1	Enable Non-initializing mode
	Note: This parameter does not take effect until you restart your DIV AT/A.
AT!C6=n	SPID Number for 1st B-channel(North American only). The SPID (Service Profile
	Identifier) as assigned by your local telephone company. This number is a unique ID
	which identifies an ISDN terminal to the local ISDN switch.
	Default: null string.
	Note: This parameter does not take effect until you restart your DIV AT/A.
AT!C7=n	SPID Number for 2nd B-channel(North America only). The SPID (Service Profile
	Identifier) as assigned by your local telephone company. This number is a unique ID
	which identifies an ISDN terminal to the local ISDN switch.
	Default: null string.
	Note: This parameter does not take effect until you restart your DIV AT/A.
AT!D1=n	Default DTE Speed. Specifies the speed of the DTE, when the DTE characteristics
	cannot be determined by AutoBauding (AT has not been typed since power up).
	Values: 1200, 2400, 3600, 4800, 7200, 9600, 12000, 14400, 19200, 24000, 28800,
	38400, 57600, 64000, 115200 or 230400.
	Default: 115200.
AT!D2=n	Default Databits Length. Specifies the length of the Databits, when the DTE
	characteristics cannot be determined by AutoBauding (AT has not been typed since
	power up).
	Values: 7, 8.
	Default: 8.
		DIVA T/A ISDN Modem Reference Guide ◆ Page 32