[SNMP] tab
Refer to page 29 for general information about this tab.
Setup items
Community *1
System name
Location
Contact
Setting values (Underlined: default)
(Default: None (blank))
(Default: None (blank))
(Default: None (blank))
(Default: None (blank))
Important:
*1 • When using the SNMP function, it is necessary to enter the community name. When no community name is entered, the SNMP function will not work.
[FTP img. trans.] tab
Refer to page 29 for general information about this tab. Refer to page 15 for further information about the actions.
Setup items |
|
|
| Setting values (Underlined: default) | |
|
|
|
| ||
FTP periodic | FTP periodic image transmission *1 *2 | On/Off | |||
image transmis- |
|
|
|
| |
Directory name |
| (Default: None (blank)) | |||
sion |
|
|
|
|
|
File name |
| (Default: None (blank)) | |||
|
| ||||
|
|
|
|
| |
|
|
|
| Name w/time&date / Name w/o | |
|
|
|
| time&date | |
|
|
|
| ||
| Transmission interval *3 *4 *5 | 1s/2s/3s/4s/5s/6s/10s/15s/20s/30s/ | |||
|
|
|
| 1min/2min/3min/4min/5min/6min/ | |
|
|
|
| 10min/15min/20min/30min/1h/1.5h/2h/ | |
|
|
|
| 3h/4h/6h/12h/24h | |
|
|
|
|
| |
| Image capture size |
| QVGA/VGA | ||
|
|
|
|
| |
FTP image | Schedule 1 - 3 |
| Mon/Tue/Wed/Thu/Fri/Sat/Sun | On/Off | |
transmission |
|
|
|
| |
|
| 24h | On/Off | ||
schedule |
|
|
|
|
|
|
| Hour (start) | 00 | - 23 (hour) (Default: 00) | |
|
|
| |||
|
|
|
|
|
|
|
|
| Minute (start) | 00 | - 59 (minute) (Default: 00) |
|
|
|
|
|
|
|
|
| Hour (stop) | 00 | - 23 (hour) (Default: 00) |
|
|
|
|
|
|
|
|
| Minute (stop) | 00 | - 59 (minute) (Default: 00) |
|
|
|
|
|
|
Important:
*1 • When "Alarm input" or "Manual" is selected for "Save trigger" on the [SD memory card] tab, the FTP peri- odic image transmission function will become unavailable. (☞ Page 31)
*2 • When "D1" is selected for "Image capture mode", FTP periodic image transmission is unavailable.
*3 • Depending on the network line speed or the network traffic, images may not be transmitted at the exact designated interval or period.
*4 • When "On" is selected for both of the alarm image transmission function and the FTP periodic image transmission function, the alarm image transmission function will be given priority over the FTP periodic image transmission function. For this reason, images may not be transmitted at the exact designated interval or period if alarms occur frequently.
*5 • Depending on the use environment, images may not be transmitted at the exact designated interval.
56
