[Basic] page
[Basic] tab
Refer to page 28 for general information about this tab.
Setup items |
| Setting values (Underlined: default) |
|
|
|
Unit title |
| (Default: |
|
|
|
Camera title | Ch1 | (Default: |
|
|
|
| Ch2 | (Default: |
|
|
|
| Ch3 | (Default: |
|
|
|
| Ch4 | (Default: |
|
|
|
Time & date | Date/time *1 | 2010/01/01 00:00:00 - 2035/12/31 23:59:59 |
|
|
|
| Time display format | 24 h/12 h/Off |
|
|
|
| Date/time display format *2 | DD/MM/YYYY (Default for the PAL model) |
|
| MM/DD/YYYY |
|
| DD/Mmm/YYYY |
|
| YYYY/MM/DD |
|
| Mmm/DD/YYYY (Default for the NTSC model) |
|
|
|
| Summer time (daylight saving) | In/Out |
|
|
|
Camera title on screen | On/Off | |
|
|
|
Camera title on | Ch1 - Ch4 | (Default: None (blank)) |
screen |
|
|
|
|
|
OSD position | OSD Position | Upper left/Lower left/Upper right/Lower right |
|
|
|
| Display style | Opaque/Transparent |
|
|
|
SD memory card error LED *3 | On/Off | |
|
|
|
Alarm status update mode *4 *5 | Polling(30sec)/Real time | |
|
|
|
Alarm status reception port *6 | 1 - 65 535 (Default: 31 004) | |
|
|
|
Automatic installation of viewer software *7 *8 | On/Off | |
|
|
|
Important:
*7 • It is impossible to display images and to receive/transmit audio between the unit and the PC when the viewer software "Network Camera View 4" is not installed on the PC.
*8 • The number of the viewer software installations can be checked on the [Upgrade] tab of the "Maintenance" page.
*1 | • The default time & date is calculated based on the manufacture date & time. | |
*2 | • When "10.04.01 13:10:00" is set for "Date/time" after selecting "24h" for "Date/time display format", time | |
| & date will be respectively displayed as follows. | |
| DD/MM/YYYY: | 01/04/2010 13:10:00 |
| MM/DD/YYYY: | 04/01/2010 13:10:00 |
| DD/Mmm/YYYY: | 01/Apr/2010 13:10:00 |
| YYYY/MM/DD: | 2010/04/01 13:10:00 |
| Mmm/DD/YYYY: | Apr/01/2010 13:10:00 |
30
