*12 • When "Frame rate" is set for "Transmission priority", number of users who can access the unit may be decreased.
*13 • When "Frame rate" is selected for "Transmission priority", this setting is available.
*14 • "Frame rate" is synchronized with "Max bit rate (per client) *". For this reason, the frame rate may be lower than the specified value when any value marked with an asterisk (*) is selected.
*15 • "Unlimited *" is available when "Frame rate" is selected for "Transmission priority".
*16 • The bit rate is synchronized with "Bandwidth control(bit rate)" on the [Network] tab of "Network" page. For this reason, the bit rate may be lower than the value when any value with an asterisk (*) on the right is selected.
*17 • When "Unlimited *" is selected for either
*18 • When "Constant bit rate" is selected for "Transmission priority", this setting is available.
*19 • Depending on the setting or photographic subject, images may not be refreshed at the exact designated interval.
*20 • When "Multicast" is selected, set the value of "Bandwidth control(bit rate)" on the [Network] tab of "Network" page greater than the total value of "Max bit rate (per client) *" of all the channels in use.
*21 • The following port numbers are unavailable since they are already in use. 10 669, 10 670
*22 • When audio is transmitted from the unit, the port number to be used will be the multicast port number plus "1 000".
*25 • When "On" is selected for
[Image/Position] tab
Refer to page 28 for general information about this tab.
Setup items
Ch No.
Menu
Operation buttons
Zoom
Focus
Control pad
Setting values (Underlined: default):
1/2/3/4
On/Off
Set
Up
Down
Left
Right
Esc
Reset/Special
All Reset
Zoom out/x1/Zoom in
Auto/Near/Far
40
