Setting up your TV, Initial Setup, Continued

Chapter 5: Setting up your TV

Initial Setup

When you first turn on or reset the TV, the Initial Setup window will appear.

1無 In the Menu Language field, press t or u to select your preferred language.

2無 Press t or u to select Time Zone Setup and set your desired time zone with t or u

and press .

3無 Next, the Location setting window will appear. For normal home use, press t or u to select Home and press .

4無 Next, ANT/CABLE In setup window will appear. Press t or u to select the input source (Cable or Antenna) for the ANT/CABLE input on the TV.

5無 If you select Antenna, the Channel Tuning Mode setup window will appear. To tune only digital channels, select Digital. To tune digital channels preferentially over analog when entering channel number directly, select Auto. For normal tuning,

select Standard. Press	to continue to Auto
Tuning.

6無 Press to select Start Scan and continue with the Auto Tuning.

You can stop the Initial Setup with . However if you do not finish the entire Initial Setup process, by pressing Power / prior to step 5 above, the Initial Setup