Toshiba 55G310U Using the PC settings feature, Using the panel lock feature, To lock the panel

Chapter 6: Using the TV’s features

Using the panel lock feature

You can lock the control panel to prevent your settings from being changed accidentally (by children, for example). When the panel lock is On, none of the controls on the TV control panel will operate except POWER.

To lock the panel:

1無 Press and highlight the Locks menu icon.

2無 Press  to display the PIN code entering screen.

3無 Enter your four-digit PIN code and press . 4無 Press  to highlight Panel Lock.

5無 Press  to select On. When the control panel is locked and any button on the control panel (except POWER) is pressed, the message “NOT AVAILABLE” appears.

To unlock the control panel:

Select Off in step 5 above, or press and hold the VOLUME – button on the TV control panel for about 10 seconds until the volume icon appears.

Using the PC settings feature

You can view an image from a PC on the TV screen. When a PC is connected to the TV's PC IN

00:00

Note: If a PC is not connected or there is no PC input signal, this feature will be grayed out in the Setup menu.

4無 Press  or  to highlight the item you want to adjust.

5無 Press  or  to make the appropriate adjustments.

Note: The screen is disrupted momentarily when adjusting the PC settings. This is not a sign of malfunction.

Mode	Description
Horizontal	Moves the picture left/right.
Position	The adjustment range is within ±10 from center.*
Vertical	Moves the picture up/down.
Position	The adjustment range is within ±10 from center.*
Clock Phase	Helps to reduce noise and sharpen the picture.
	The adjustment range is within ±16 from center.*

terminal, you can use the PC Settings feature to make adjustments to the image. If the edges of the

Sampling

Helps to reduce noise and minimize periodic

picture are cut off, readjust the Horizontal Position and Vertical Position. If the picture is affected by

Clock

vertical stripes on the screen.

The adjustment range is within ±10 from center.*

interference, readjust the Clock Phase and Sampling Clock.

To adjust the PC settings:

1無 Repeatedly press to select PC input mode ( “Selecting the video input source to view” page 28).

2無 Press	and open the Setup menu.
3無 Highlight PC Settings and press		.

Reset	Highlight this item then press	to get an
	optimum adjustment automatically.

** The default settings may vary depending on the input signal format.

(continued)

42