Important:

To enhance the security, change the password for the user "admin". It is recommended to change this pass- word periodically.

When displaying multiple H.264 (or MPEG-4) images on a PC, images may not be displayed depending on the performance of the PC.

Note:

When "H.264" is selected for "Video encoding format", H.264 video will be displayed. When "MPEG-4" is selected, MPEG-4 images will be displayed.

When multiple users are receiving audio, the frame rate of H.264 (or MPEG-4) images or the refresh interval of

JPEG images may be lower than the specified value.

The maximum number of concurrent access user is 14 including users who are receiving H.264 (or MPEG-4) images and users who is receiving JPEG images. Depending on the set values for "Bandwidth control (bit rate)" and "Max bit rate (per client) *", the maximum concurrent access number may be less than 14 users. When 14 users are concurrently accessing, the access limit message will be displayed for users who subsequently attempt to access. When "Multicast" is selected for "Transmission type" of "H.264" (or "MPEG-4"), only the first user who accessed to monitor H.264 (or MPEG-4) images will be included in the maximum number. The second and subsequent users who are monitoring H.264 (or MPEG-4) images will not be included in the maximum num- ber.

When "On" is selected for "H.264 transmission" (or "MPEG-4 transmission") (pages 34 to 40), H.264 (or MPEG-4) images will be displayed. When "Off" is selected, a JPEG image will be displayed. It is possible to dis- play a JPEG image even when "On" is selected for "H.264" (or "MPEG-4 transmission").

The refresh interval may become longer depending on a network environment, PC performance, photographic subject, access traffic, etc.

<Refresh interval of JPEG images>

When "Ch1 only" is selected for "Ch selection"

When "On" is selected for "H.264 transmission" (or "MPEG-4 transmission")

JPEG (VGA, QVGA, D1): 15 fps (NTSC model), 12.5 fps (PAL model)

When "Off" is selected for "H.264 transmission" (or "MPEG-4 transmission")

JPEG (VGA, QVGA, D1): 30 fps (NTSC model), 25 fps (PAL model)

When "Ch1-2" is selected for "Ch selection"

When "On" is selected for "H.264 transmission" (or "MPEG-4 transmission")

JPEG (VGA, QVGA, D1): 15 fps (NTSC model), 12.5 fps (PAL model)

When "Off" is selected for "H.264 transmission" (or "MPEG-4 transmission")

JPEG (VGA, QVGA, D1): 15 fps (NTSC model), 12.5 fps (PAL model)

When "Ch1-3" is selected for "Ch selection"

When "On" is selected for "H.264 transmission" (or "MPEG-4 transmission")

JPEG (VGA, QVGA, D1): 10 fps (NTSC model), 8.3 fps (PAL model)

When "Off" is selected for "H.264 transmission" (or "MPEG-4 transmission")

JPEG (VGA, QVGA, D1): 15 fps (NTSC model), 12.5 fps (PAL model)

When "Ch1-4" is selected for "Ch selection"

When "On" is selected for "H.264 transmission" (or "MPEG-4 transmission")

JPEG (VGA, QVGA): 3 fps (NTSC model), 3.1 fps (PAL model)

JPEG (D1): 2 fps (NTSC model), 2.1 fps (PAL model)

When "Off" is selected for "H.264 transmission" (or "MPEG-4 transmission")

• JPEG (VGA, QVGA, D1): 15 fps (NTSC model), 12.5 fps (PAL model)

6

Page 6
Image 6
Panasonic WJ-GXE500E manual When Ch1-2 is selected for Ch selection, When Ch1-3 is selected for Ch selection