STEP 6 (See Diagram 6)
A.) Place the Lifting Sleeve (#8) in between the two Safety Stop Frames (#18). Align the holes. Insert the Weight Bar (#13) from outside of one Safety Stop Frame through the Lifting Sleeve to the other Safety Stop Frame on the other side.
B.) Turn and attach the two safety catch hooks on the Lifting Sleeve (#8) to the selected slots on the Left and Right Uptight Beams (#1 & #2).
C.) Attach two Weight Bar Sleeves (#35) onto the Weight Bar from both ends. Attach two Spring Clips (#62) to the Sleeves.
D.) Attach four Weight Posts (#12) into the holes on Left & Right Rear Support (#5 & #6). Secure each Weight Post to the Support with one M10 x ¾” Allen Bolt (#56) and one Ø ¾” Washer (#57). Slide four Olympic Sleeves (#34) to the four Weight Posts. Attach four Spring Clips to the Sleeves.
14
