STEP 9 (See Diagram 9)

A.) Attach the Front Press (#6) to the Front Press Base (#5). Secure it with one 8 ¾” Long Axle (#57), two Ø ¾” Washers (#91), and two M10 Aircraft Nuts (#94). Do not over tighten the Nuts. Make sure the Front Press is able to swivel smoothly.

B.) Use the T-shaped Lock Pin (#40) to lock the Front Press to the Front Press Base in desired position.

C.) Connect the Lat Bat (#21) to Upper Cable with two Hooks (#69) and one Short Chain (#67).

D.) Connect the Shiver Bar (#22) to Lower Cable with two Hooks and one Long Chain (#68).

DIAGRAM 9

21

Page 22
Image 22
Impex MWM-7300 manual Diagram