ASSEMBLY INSTRUCTION
Tools Required for Assembling the Machine: Two Adjustable Wrenches, two Allen
Wrenches, and one Philips Screwdriver. NOTE: It is strongly recommended that this machine to be assembled by two or more people to avoid possible injury.
STEP 1 (See Diagram 1)
A.) Do not tighten Nuts and Bolts until instructed to do so.
B.) Attach the front of Main Base Frame (#1) onto the Foot Plate (#7). Secure it with two M10 x 2 1/8” Allen Bolts (#80) and two Ø ¾” Washers (#91).
C.) Attach the Rear Vertical Frame (#3) to the Main Base Frame (#1). Secure it with one 3 1/8” x 3 ½” Bracket (#27), one M10 x 2 3/8” Allen Bolt (#79) and one Ø ¾” Washer (#91) to the bottom hole, one M10 x 2 3/8” Carriage Bolt (#73), one Ø ¾” Washer (#91), and one M10 Aircraft Nut (#94) to the upper hole.
D.) Attach the Front Vertical Frame (#2) onto the Main Base Frame. Attach the Lower Cross Brace (#16) to the Front Vertical Fame. Align the holes. Secure the Lower Cross Brace, Front Vertical Frame, and the Main Base Frame together with two M10 x 4 1/8” Carriage Bolts (#70), two Ø ¾” Washers (#91), and two M10 Aircraft Nuts (#94).
E.) Attach the Upper Frame onto the bracket on the Rear Vertical Frame (#3). Secure it with one M10 x 5/8” Allen Bolt (#83) and one Ø ¾”Washer (#91).
F.) Attach the Upper Frame onto the Front Vertical Frame (#2). Secure it with two M10 x 2 3/8” Carriage Bolts (#73), one 4 ¾” x 3 1/8” Bracket (#26), two Ø ¾” Washers (#91), and two M10 Aircraft Nuts (#94).
6
