Impex MWM 1801 manual Diagram

STEP 13 (See Diagram 13)

A.) Insert one Foam Tube (#34) halfway through the hole on the Right Seat Support (#8). Insert one Foam Tube (#34) halfway through the hole on the Leg Developer (#9). Push four Foam Rolls (#38) onto the Tubes from both sides. Plug the Foam Roll End Caps (#74) into the ends.

B.) Attach the Lat Bar (#20) to the Chain (#51) using a C-clip (#63). Attach the Chain to the Upper Cable (#26). See How To Use.

C.) Attach the AB Strap (#25) to the AB Cable (#30) using a C-clip.

D.) Attach the Arm Curl Handle (#32) to a Chain (#51) using a C-clip. Attach the Chain to the Lower Cable (#27). Remove the Chain and Handle when using the Leg Developer.

DIAGRAM 13

23