Impex PHE 2000 manual See Diagram

STEP 3 (See Diagram 3)

A.) Attach the Upper Frame (#4) onto the two Guide Rods (#18). Secure each Guide Rod to the Upper Frame with on M10 x 1” Allen Bolt (#75) and ∅ ¾” Washer (#87). DO NOT tighten the Nuts and Bolts yet.

B.) Place the Upper Frame (#4) onto the top of the Vertical Frame (#5). Secure it with one 5 ½” x 2” Bracket (#27), two M10 x 2 ¾” Carriage Bolts (#72), two ∅ ¾” Washers (#87), and two M10 Aircraft Nuts (#89).

C.) Securely tighten all Nuts and Bolts previously installed.

D.) Attach the Backrest Board (#22) to the Backrest Support Frame (#12). Secure it with two M8 x 1 5/8” Allen Bolts (#82) and ∅ 5/8” Washers (#86).

E.) Attach the Backrest Support Frame (#12) to the Vertical Frame (#5). Secure it with one M10 x 3 ½” Allen Bolt (#73), two ∅ ¾” Washers (#87), and one M10 Aircraft Nut (#89).

F.) Thread the Long T-shape Lock Pin (#43) into the hole on the Vertical Frame. Insert the Pin into selected hole on the Backrest Support Frame to obtain the desired Backrest position.

G.)Attach the Seat Support Frame (#6) to the Vertical Frame (#5). Secure it with one M10 x 2 ¾” Carriage Bolt (#72), ∅ ¾” Washer (#87), and M10 Aircraft Nut (#89).

8