A.) Do not tighten all Nuts and Bolts until instructed to so.

B.) Attach the Middle Vertical Frame (#9) under the Rear Top Beam (#6) and onto the Rear Base Frame (#8).

C.) Attach the Lower Pulley Frame (#16) to the Middle Vertical Frame from rear. Attach the Foot Plate (#32) to the Middle Vertical Frame from front. Secure them together with two M10 x 3” Carriage Bolts (#89), two Ø ¾” Washers (#107), and two M10 Aircraft Nuts (#110).

D.) Attach the Weight Glide Post (#17) to rear of Lower Pulley Frame. Secure the top hole with one 3 1/8” x 1 ¾” Bracket (#36), one M10 x 2 ½” Carriage Bolt (#88), one Ø ¾” Washer (#107), one M10 Aircraft Nut (#110). Secure the lower hole with one M10 x 2 ½” Allen Bolt (#95) and one Ø ¾” Washer (#107).

E.) Slide the Sliding Weight Post (#23) to the Weight Glide Post from top. Make sure the triangular bracket on Sliding Weight Post is facing upward.

F.) Attach the Rear Upper Frame (#18) to Weight Glide Post. Secure the lower hole with one 3 1/8” x 1 ¾” Bracket (#36), one M10 x 2 ½” Carriage Bolt (#88), one Ø ¾” Washer (#107), one M10 Aircraft Nut (#110). Secure the top hole with one M10 x 2 ½” Allen Bolt (#95) and one Ø ¾” Washer (#107).

G.)Attach the Rear Upper Frame to the Rear Top Beam (#6). Secure Rear Upper Frame, Rear Top Beam, and Middle Vertical Frame together with two M10 x 2 ½” Carriage Bolts (#88), two Ø ¾” Washers (#107), and two M10 Aircraft Nuts (#110).

H.) Securely tighten all Nuts and Bolts installed in Step-1, Step-2, and Step-3.

11

DIAGRAM 3

Page 12
Image 12
Impex SM-4008 Do not tighten all Nuts and Bolts until instructed to so, Securely tighten all Nuts and Bolts installed in