(#87). Push the Butterfly Arm Foam Roll (#64) to Right Butterfly. Repeat same step to install the Left Butterfly (#12).

B.) Insert two Swivel Pulley Brackets (#15) into the holes on the Butterfly Pulley Bracket (#14). Secure each Swivel Pulley Bracket with one M12 x 5” Hex Bolt (#100), two Ø 1” Washer (#108), and one M12 Aircraft Nut (#111). Do not over tighten the Nuts. Make sure the

Brackets are able to swivel.

DIAGRAM 5

14

CABLE LOOP DIAGRAM

Page 15
Image 15
Impex SM-4008 manual Diagram Cable Loop Diagram, Brackets are able to swivel