ASSEMBLY INSTRUCTION
Tools required to assembly the machine:
Two Adjustable Wrenches
STEP 1 (SEE Diagram 1)
A.) Connect the two Rear Upright Beams (#1) by a Cross Brace (#25) in the
Bracket (#12), and two M10 Aircraft Nuts (#15) on each side of the Cross Brace. DO NOT tighten the nuts and bolts yet.
B.) Insert the Backrest Adjustment Bar (#10) through a selected hole to obtain desired incline of Backrest.
C.) Insert two Bar Catches (#2) & (#6) into the selected hole on the Rear Upright
Beams (#1) to obtain the desired height to hold the Curl Bar (#3). Place two Spring Clips (#4) onto the Curl Bar on both ends.
DIAGRAM 1
4
