Loading the Dishwasher
Before placing the dishes in the dishwasher, remove the larger food particles to prevent the filter from becoming clogged, which results in reduced performance.
If the pots and pans have
Pull out the racks to facilitate loading the dishwasher.
How to Use the Lower Rack
We recommend that you place the most difficult to clean items on the bottom rack: pots, pans, lids, serving dishes and bowls, as shown in the figure to the right.
It is preferable to place serving dishes and lids on the sides of the racks in order to avoid blocking the rotation of the top spray arm.
-Pots, serving bowls, etc. must always be placed top down.
-Deep pots should be slanted to allow the water to flow out.
The cutlery basket can be split up (see figure A): when you only have little cutlery to wash, you can use just half the basket. Save space for the saucepans or you can place the other half of the basket in the upper rack instead. This basket is equipped with two removable grids: insert the cutlery one by one into the slots, with the handles at the bottom. Position them so that they don't touch.
After loading the dishes, remember to check that the blades on the sprayer arms can turn freely without hitting against any dishes.
Especially long utensils should be placed in the horizon- tal position at the front of the upper rack.
How to Use the Upper Rack
The upper rack is designed to hold more delicate and lighter dishware, such as glasses, coffee and tea cups and saucers, as well as plates, small bowls and shallow pans (as long as they are not too dirty).
-Position the dishes and cookware so that they do not get moved by the spray of water.
How to adjust the Upper rack ...
The upper rack can be adjusted for height by using the knobs located on the sides of the rack itself (see figure C).
Lower Rack | Upper Rack |
Load for 12 Standard Settings
Lower Rack | Upper Rack |
Normal Daily Load
A
fig. C
5 | GB |
