Instructions for Installation
For easy installation proceed as follows:
•Fix the wall brackets and Splashback.
•Fix the canopy.
•Set the hood for recirculation or evacuation.
•Connect the hood to the mains supply and ensure that it works properly.
•Fix the telescopic metal frame.
Fixing the wall brackets (and splashback)
Ref. to Fig. 2a-b
•Draw a vertical line on the wall, from the centre of the cooking appliance up to the ceiling, using a marking pen. This is to ensure the correct vertical alignment of many components.
Fixing the wall brackets 1:
•Put the bracket I to the wall, aligning its marked centre across the vertical line, ensuring that the distance between the centres of the holes and the cooking area is as follows:
•Draw a horizontal line on the wall ensuring that the distance from the cooktop is as follows:
a)when the splasback is to be installed: d = 270 mm + H, where H is the height of the visible part of the splashback; as the splashback can be of different heights, the correct H figure can only be obtained by measuring the actual height of the splashback to be fitted.
b)without splashback d = 875 mm minimum.
2X
1 | 115 |
140 | |
d = 875 min | 265 |
650 min |
2X
1 | 115 |
140 | |
| 265 |
d |
|
| H |
B
243_A02
Fig. 2
B
H
b | a |
GB
5
