Rinnai E75CN, E110CP, E110CN, E75CP Isolating the boiler, the boiler and/or the installation

10.2 Activating factory settings (green button function)

To activate the factory settings again please follow the next procedure (Note: all altered adjustments will be set back to their orignial factory settings):

- Select, when necessary, the technical read out; - Select with the MODE-button chapter PARA;

- Press the STORE-button.

The word "Copy" will appear and the factory settings are active again.

11 Isolating the boiler

Some situations require turning the entire boiler off.

By switching off the three buttons with the LED's for central heating, hot water and

pump program ( , or ), the boiler is switched off. Do not shut off the power of the boiler, which means the circulation pump and the three-way valve are activated once every 24 hours in order to prevent these parts from seizing up.

!	CAUTION	In the event of frost danger during an isolated boiler it is advisable to drain
		the boiler and/or the installation.

Installation & Servicing Instructions Rinnai E-Series

49