AUTOMATIC CLEANING mode
During the AUTOMATIC CLEANING cycle, the internal temperature of the oven reaches 500°C. The pyrolytic cycle is activated, burning away food and grime residues. Dirt is literally incinerated.
Keep children away from the appliance during the automatic cleaning cycle as surfaces may become very hot. Particles may ignite inside the oven as a result of the combustion process. There is no cause for concern: this process is both normal and hazard- free.
Before activating the AUTOMATIC CLEANING cycle:
•Remove large or coarse food residues from the inside of the oven using a damp sponge. Do not use detergents.
•Remove all accessories.
•Do not place tea towels or pot holders over the oven handle.
•Turn the SELECTOR knob to the “0” position.
If the oven is too hot, the pyrolytic cycle may not start. Wait for the oven to cool down.
The programme may only be started once the oven door has been closed.
To activate the AUTOMATIC CLEANING cycle press
and hold the 
button for approximately 4 seconds. The TIMER KNOB may be used to select the desired cleaning level; there are three default time settings which cannot be modified.
1.Economy (ECO): turn the knob towards
2.Normal (NOR): initial level. Duration 1 hour and 30 minutes.
3.Intensive (INT): turn the knob towards “+”. Duration 2 hours.
4.Press the 
button to confirm.
An end time for the AUTOMATIC CLEANING cycle (as for a normal cooking cycle) may be programmed (see Programming the automatic cleaning end time).
Safety devices
GB
•The 
icon on the display, when lit, indicates that the oven door was automatically locked as soon as the temperature reached a high value.
•The 
icon indicates that the cleaning cycle may be cancelled at any time by pressing the 
button.
•If a malfunction occurs, the heating elements will be switched off.
•Once the oven door has been locked, you cannot change the duration and cycle end time settings.
Programming the automatic cleaning end time
1.Press the 
button until the 
icon and the two digits on the DISPLAY begin to flash.
2.Turn the TIMER KNOB towards “+” and
3.Press the 
button again so that the other two numerical digits on the DISPLAY begin to flash.
4.Turn the TIMER KNOB towards “+” and
5.Press the 
button again to confirm.
6.When the set time has elapsed, the text END appears on the display and a buzzer sounds.
• For example: it is 9:00 a.m. and the AUTOMATIC CLEANING Economy level has been selected, with the default duration of 1 hour. 12:30 is scheduled as the end time. The programme will start automatically at 11:30 a.m.
Programming has been set when the 
and 
buttons are illuminated. The DISPLAY shows the AUTOMATIC CLEANING end time and the duration alternately.
Once the automatic cleaning cycle is over
You will have to wait until the temperature inside the oven has cooled down sufficiently before you can open the oven door. You will notice some white dust deposits on the bottom and the sides of your oven; remove these deposits with a damp sponge once the oven has cooled down completely. Alternatively, you can make use of the already heated oven, in which case it is not necessary to remove the deposits, they are completely harmless and will not affect your food in any way.
11
