Installation

! Before operating your new appliance please read

GB

this instruction booklet carefully. It contains

 

 

important information concerning the safe installation

 

and operation of the appliance.

 

! Please keep these operating instructions for future

 

reference. Make sure that the instructions are kept

 

with the appliance if it is sold, given away or moved.

 

! The appliance must be installed by a qualified

 

professional according to the instructions provided.

 

! Any necessary adjustment or maintenance must be

 

performed after the cooker has been disconnected

 

from the electricity supply.

Positioning

!This unit may be installed and used only in permanently ventilated rooms according to the British Standards Codes Of Practice: B.S. 6172/B.S. 5440, Par. 2 and B.S. 6891 Current Editions. The following requirements must be observed:

a) The cooker should not be installed in a bed sitting room with a volume of less than 20m3. If it is installed in a room of volume less than 5m3 an air vent of effective area of 110cm2 is required, if it is installed in a room of volume between 5m3 and 10m3 a supplementary airvent area of 50cm2 is required, if the volume exceeds 11m3 no airvent is required. However, if the room has a door or a window which opens directly to the outside no air vent is required even when the volume is between 5m3 and 11m3.

b )During prolonged use of the appliance you may consider it necessary to open a window to the outside to improve ventilation.

c) If there are other fuel burning appliances in the

same room, B.S.5440 Part 2 Current Edition, should, be consulted to determine the requisite air vent requirements.

The legs* fit into the slots on the underside of the base of the cooker.

Installation of the cooker

The appliance can be installed next to furniture units which are no taller than the top of the cooker hob. The wall in direct contact with the back panel of the cooker must be made of non-flammable material. During operation the back panel of the cooker could reach a temperature of 50°C above room temperature. For proper installation of the cooker, the following precautions must be taken:

a)The appliance can be placed in a kitchen, dining room or bedsit, but not in a bathroom.

b )All furniture around the appliance must be placed at least 200 mm from the top of the cooker, should the surface of the appliance be higher than the worktop of this furniture. Curtains should not be placed behind the cooker or less than 200 mm away from the sides of the appliance.

c)Any hoods must be installed according to the requirements in the installation manual for the

hoods themselves.

d )If the cooker is installed beneath a wall cabinet, the latter must be situated at a minimum of 420

mm above the hob. The minimum distance between the worktop and kitchen units made of combustible material is 700 mm (Fig. A).

e)The wall in direct contact with the back panel of the cooker must be made of non-flammable materials.

f ) The cooker is fitted with a safety chain that must be attached to a hook, secured to the wall behind the appliance.

!Some models can have their gas connection inverted. It is important to make sure the safety chain is always situated on the side which corresponds to the hose holder (Fig. B).

Levelling

If it is necessary to level the appliance, screw the adjustable feet into the places provided on each corner of the base of the cooker (see figure).

HOOD

 

Min. 600 mm.

min. 650 mm. with hood min. 700 mm. without hood

Min. 420 mm.

Min. 420 mm.

Fig. A

Fig. B

2

Page 2
Image 2
Indesit IS50D1 specifications Positioning, Installation of the cooker

IS50D1 specifications

The Indesit IS50D1 is a freestanding gas cooker that combines functionality and practicality, making it a valuable addition to any kitchen. This model stands out for its thoughtful design and essential features that cater to everyday cooking needs.

One of the main features of the IS50D1 is its four gas burners, which are designed to provide precise heat control. Each burner is equipped with a safety device that automatically cuts off the gas supply if the flame goes out, ensuring a safer cooking environment. This model also includes a sturdy cast iron pan support, which offers exceptional stability for pots and pans, accommodating various sizes and weights.

The oven section of the Indesit IS50D1 is another highlight, featuring a conventional gas oven. This oven is perfect for traditional baking and roasting, providing even heat distribution for optimal results. The 50-liter capacity offers ample space for preparing meals for families or gatherings. Additionally, the grill function is a valuable feature, enabling users to achieve perfect browning and grilling of various dishes.

In terms of convenience, the IS50D1 is designed with an easy-clean enamel interior. This surface helps minimize the accumulation of food residue and grease, making maintenance straightforward and efficient. The oven door is also fitted with double-glazed glass, enhancing safety by reducing heat loss and ensuring a cooler exterior surface.

The control knobs on the Indesit IS50D1 are located on the front panel for easy access and operation. Clear markings make it user-friendly, even for those who may be less experienced in the kitchen.

Energy efficiency is a key consideration for this cooker. The IS50D1 is designed to consume gas efficiently, making it a cost-effective option for everyday cooking. With its reliable performance and solid construction, this model is built to withstand daily use, ensuring longevity and durability.

The overall aesthetic of the Indesit IS50D1 is modern and clean, available in classic white, which allows it to blend seamlessly with various kitchen styles.

In conclusion, the Indesit IS50D1 is a well-rounded gas cooker that offers essential features and technologies for both novice and experienced cooks. With its safety features, practical design, and ease of use, it is an excellent choice for those seeking reliability and efficiency in their culinary endeavors.