Connecting the drain hose

• the socket is compatible with the washing machine’s plug.

GB

If this is not the case, replace the socket or the plug.

65 - 100 cm

Connect the drain hose, wi- thout bending it, to a draining duct or a wall drain situated between 65 and 100 cm from the floor;

Your appliance is now supplied with a 13 amp fused plug

it can be plugged into a 13 amp socket for immediate use.

Before using the appliance please read the instructions below.

WARNING - THIS APPLIANCE MUST BE EARTHED.

THE FOLLOWING OPERATIONS SHOULD BE CARRIED

OUT BY A QUALIFIED ELECTRICIAN.

Replacing the fuse:

When replacing a faulty fuse, a 13 amp ASTA approved fuse

Where it connects to the waste water pipe cut end off spigot or remove the blanking cap

The drain hose may be connected to an under-sink trap. Before connecting the drain hose from the machine ensure that any blanks or removable ends have been taken off the spigot.

to BS 1362 should always be used, and the fuse cover re-

fitted. If the fuse cover is lost, the plug must not be used until

a replacement is obtained.

Replacement fuse covers:

If a replacement fuse cover is fitted, it must be of the correct

colour as indicated by the coloured marking or the colour that

is embossed in words on the base of the plug. Replacements

can be obtained directly from your nearest Service Depot.

Removing the plug:

If your appliance has a non-rewireable moulded plug and you

If it is placed over the edge of a basin or sink be sure the free end of the hose should not be underwater.

!We advise against the use of hose extensions; in case of absolute need, the extension must have the same diameter as the original hose and must not exceed 150 cm in length. Ensure that if the drain hose is pushed into a standpipe, that the end does not go down more than 15cms (6 inches). If the hose is pushed down too far, this may cause the machine to self -syphon ie. continuously empty as it is filling.

Electric connection

Before plugging the appliance into the mains socket, make sure that:

•the socket is earthed and in compliance with the appli- cable law;

•the socket is able to sustain the appliance’s maximum power load indicated on the Technical Data Plate fixed on the machine;

•the supply voltage is included within the values indica- ted on the Technical Data Plate fixed on the machine.

should wish to re-route the mains cable through partitions,

units etc., please ensure that either:

the plug is replaced by a fused 13 ampere re-wearable plug

bearing the BSI mark of approval.

or:

the mains cable is wired directly into a 13 amp cable outlet,

controlled by a switch, (in compliance with BS 5733) which

is accessible without moving the appliance.

Disposing of the plug:

Ensure that before disposing of the plug itself, you make

the pins unusable so that it cannot be accidentally inserted

into a socket.

Instructions for connecting cable to an alternative plug: Important: the wires in the mains lead are coloured in accor- dance with the following code:

Green & Yellow

Earth

Blue

Neutral

Brown

Live

3

Page 2 Page 4
Page 3
Image 3
Indesit IWE 91281 Replacement is obtained, Replacement fuse covers, Units etc., please ensure that either, Into a socket
Page 2 Page 4

IWE 91281 specifications

The Indesit IWE 91281 is a modern washing machine designed to cater to the needs of households looking for efficiency, performance, and cutting-edge technology. With a sleek and compact design, it seamlessly fits into any laundry space, making it an ideal choice for both large and small homes alike.

One of the standout features of the Indesit IWE 91281 is its impressive 9 kg capacity. This allows users to wash larger loads in a single cycle, saving time and energy. The machine’s maximum spin speed of 1200 RPM ensures that clothes come out drier, reducing the need for additional drying time. This is particularly beneficial for busy families, where time-saving solutions are essential.

The IWE 91281 includes a variety of wash programs designed to handle different fabric types and laundry needs. From delicate fabrics to heavily soiled items, the machine offers tailored cycles to ensure optimal cleaning performance. Notably, it features specialized programs such as Cotton, Synthetics, and Eco cycles, which caters to energy-conscious consumers looking to minimize their environmental impact without compromising on cleanliness.

Incorporating advanced washing technologies, the IWE 91281 utilizes the innovative Push & Wash feature. This allows users to start a wash cycle with just a single button press, simplifying the washing process. Additionally, it is equipped with a delay timer, allowing users to set a wash to begin at a more convenient time.

The machine’s energy efficiency rating is commendable, which translates to lower energy bills and a reduced carbon footprint. Its design focuses on minimizing water and energy consumption while maintaining effective cleaning results, making it an eco-friendly choice.

Furthermore, the Indesit IWE 91281 comes with a range of additional features, such as a clear digital display for easy program selection, child lock functionality for safety, and an adjustable spin speed feature. These characteristics enhance the overall user experience, ensuring that washing clothes is as convenient and efficient as possible.

In summary, the Indesit IWE 91281 is a well-rounded washing machine that combines capacity, technology, and efficiency, making it an excellent addition to any home. With its intuitive features and emphasis on user convenience, it represents a practical solution for today’s laundry challenges.
Top Page Image Contents