GB

The machine wont spin properly.

The machine leaks from the dispenser.

The machine leaks (other than dispenser).

The indicator lights on the console are flashing rapidly.

The machine smells.

The machine door cannot be opened.

Door Seal damaged at the bottom.

The water level is too low when the machine is washing.

There is too much foam.

•Out of Balance detected when attempting to go into a spin cycle - If this happens the machine will continue to try to repeat the distribution of the load required before the machine will go into higher spin speeds - This will increase the programme time accordingly. This is a safety feature to prevent damage. Out of Balance can be caused by washing a single heavy item (eg duvet, quilt, etc). - Try the programme again using a different load.

•The dispenser drawer is blocked with detergent and requires cleaning.

•The water pressure is too high and requires turning down - turn down the tap on the water supply pipe slightly and try again.

•The machine is tilting forwards - It must be level when in its final position.

•The fill hose is loose, check both the cabinet and tap ends.

•The fill hose is tight but still leaks, if so replace the rubber washers, or the fill hose is missing the rubber washer.

•The drain hose is not fixed in properly.

•Switch off the machine and unplug it, wait for approximately 1 minute and then switch it back on again If the problem persists contact the Technical Assistance Service.

•The machine requires a service wash. Run a 90 degree wash cycle with deter- gent and no laundry.

•The door will not open until the door lock indicator light goes out shortly after the program has finished.

•The door seal has drainage holes at the bottom - This is normal.

•The water level is correct if it can be seen at the bottom of the door.

•The detergent is not suitable for machine washing (it should display the text ‘for washing machines’ or ‘hand and machine wash’ or the like).

•Too much detergent was used - less detergent is required in soft water.

After completing the programme, or before starting a programme, the machine has turned itself off (no lights).

General.

•To comply with new energy saving regulations the machine is fitted with an automatic standby system. Press ‘ON/OFF’ button for 3 seconds to activate the machine, it can then either be switched off or a new programme selected.

•Your washing machine contains sensors that monitor progress during the wash cycle (eg: Water Levels, Temperatures, Out of Balance loads, Wash time/progress). Normally, if your machine successfully completes the cycle, there is unlikely to be anything wrong!

Remember, you will be charged for a service call for problems caused by incorrect installation, as listed above. Not emptying contents from pockets may cause pump or drain blockages, or may damage the machine.

Do not wash items which do not have a wash label, or wash items that are not intended as machine washable.

14

Page 13 Page 15
Page 14
Image 14
Indesit IWE 91281 manual
Page 13 Page 15

IWE 91281 specifications

The Indesit IWE 91281 is a modern washing machine designed to cater to the needs of households looking for efficiency, performance, and cutting-edge technology. With a sleek and compact design, it seamlessly fits into any laundry space, making it an ideal choice for both large and small homes alike.

One of the standout features of the Indesit IWE 91281 is its impressive 9 kg capacity. This allows users to wash larger loads in a single cycle, saving time and energy. The machine’s maximum spin speed of 1200 RPM ensures that clothes come out drier, reducing the need for additional drying time. This is particularly beneficial for busy families, where time-saving solutions are essential.

The IWE 91281 includes a variety of wash programs designed to handle different fabric types and laundry needs. From delicate fabrics to heavily soiled items, the machine offers tailored cycles to ensure optimal cleaning performance. Notably, it features specialized programs such as Cotton, Synthetics, and Eco cycles, which caters to energy-conscious consumers looking to minimize their environmental impact without compromising on cleanliness.

Incorporating advanced washing technologies, the IWE 91281 utilizes the innovative Push & Wash feature. This allows users to start a wash cycle with just a single button press, simplifying the washing process. Additionally, it is equipped with a delay timer, allowing users to set a wash to begin at a more convenient time.

The machine’s energy efficiency rating is commendable, which translates to lower energy bills and a reduced carbon footprint. Its design focuses on minimizing water and energy consumption while maintaining effective cleaning results, making it an eco-friendly choice.

Furthermore, the Indesit IWE 91281 comes with a range of additional features, such as a clear digital display for easy program selection, child lock functionality for safety, and an adjustable spin speed feature. These characteristics enhance the overall user experience, ensuring that washing clothes is as convenient and efficient as possible.

In summary, the Indesit IWE 91281 is a well-rounded washing machine that combines capacity, technology, and efficiency, making it an excellent addition to any home. With its intuitive features and emphasis on user convenience, it represents a practical solution for today’s laundry challenges.
Top Page Image Contents