Using your refrigerator
TEMPERATURE
CONTROL
LIGHT SWITCH
Setting the control...
The control for the refrigerator temperature is in the refrigerator. When the refrigerator is plugged in and the Run Switch is moved to RUN.
l Set the Thermostat Control to 3.
Give the refrigerator time to cool down
completely before adding food. (This may take several hours.)
This setting should be about right for normal
household refrigerator usage.
The control will be set about right when milk or juice is as cold as you like. In hot weather or if the door is opened often, turn the control to a higher number to keep the temperature you like. If the milk or juice is too cold or refrigerator items start to freeze, turn the control to a lower number or adjust the freezer tray damper. Wait 24 hours after an
adjustment is made before further change is made to the controls.
The freezer tray...
The freezer tray is located under the freezer compartment.
The damper at the rear of the freezer tray helps
control the refrigerator temperature for warm weather operation. The damper can be adjusted
for proper cooling and defrosting of the refrigerator.
To adjust the damper:
1.Pull out the freezer tray.
2.Lift out the damper from the rear of the tray.
3.Slide damper into the desired position.
NOTE: “B&D” positions provide fine cooling adjustments to best meet your cooling needs in warm weather.
B- | “A” POSITION | FOR NORMAL |
C- | COOLING AND | DEFROSTING. |
D- |
|
|
E - | IFULL Open1 |
|
“E” POSITION FOR WARM WEATHER SElllNG.
