fax

chapter 3

3Press or ! to scroll through the speed-dial entries, and then press OK to select the appropriate entry.

4When the current fax number appears, press to erase it.

5Reenter the fax number.

Tip: To enter a pause in the fax number, press Redial/Pause.

6Press OK to save the new number.

7If you need to change the name, press to erase it, and then reenter the name using the keypad.

8Press OK.

9Press 1 (Yes) to update another entry or 2 (No) to exit.

delete speed-dial entries

Follow these steps to delete an individual or group speed-dial entry.

1Press Setup.

2Press 2, then press 3.

This selects Speed Dial Setup and then selects Delete Speed Dial.

3Press ! until the speed-dial entry that you want to delete appears, and then press OK. You can also enter the speed-dial code by using the front panel.

Note: Deleting a group speed-dial entry will not delete the individual speed-dial entries that make up the group.

change fax resolution and lighter/darker settings

You can change the fax resolution and lighter/darker settings of documents that you are sending.

Note: These settings do not affect copy settings. Copy resolution and copy contrast are set independently from fax resolution and fax contrast.

This section contains the following topics:

change the fax resolution on page 38

change lighter/darker setting on page 39

set new defaults on page 40

change the fax resolution

The Fax Resolution setting affects the transmission speed and quality of faxed black-and-white documents. The HP Fax only sends faxes at the highest resolution supported by the receiving fax machine. You can only change the fax

38

hp fax 1240 series

Page 48
Image 48
HP 1240 manual Change fax resolution and lighter/darker settings, Delete speed-dial entries, Change the fax resolution