Installation

WARNING - THIS APPLIANCE MUST BE EARTHED.

GB

Mains Connection

Your cooker should have been checked to ensure that the voltage corresponds with your supply voltage, this is stated on the rating plate, which is situated on the outer rear panel.The model number and the serial number are located on the front of the cooker, as shown on the Features page.

The cooker must be connected by a competent person such as one who is a, NICEIC registered contractor to a suitable double-pole control unit with a minimum rating of 32A and a minimum contact clearance of 3mm (applicable to newer properties, older properties where a 30A double pole control unit and a minimum contact clearance of 3mm is acceptable).

The double pole control unit should be fitted adjacent to the cooker, in accordance with IEE regulations.The control unit must be within 2 metres of but not directly above the appliance and should be easily accessible in the event of an emergency.

The power supply cable should conform to B.S.6004 with a conductor size of 6mm2, minimum.

Access to the mains terminals is gained by removing the rear access cover. The mains cable must pass through the cable clamp adjacent to the terminal block. Sufficient cable should be used to allow the cooker to be pulled out for servicing.

Ensure that the mains cable is routed away from any brackets affixed to the rear panel and is not trapped to the rear wall when pushing the cooker into position between cabinets.

Levelling

Four feet are fitted which can be adjusted up or down to set the height (900mm - 930mm) and level the cooker.

The feet can be simply screwed in or out to lower or raise the cooker.

After the correct height is achieved, lock the feet into position by tightening the locking nut using an open ended spanner.

CAUTION: Some soft floor coverings may get damaged if the cooker is not moved carefully.

NOTE: Ensure oven shelves are level by using a spirit level on the rod shelves.

Siting the Cooker

The cooker is designed to fit between kitchen cabinets spaced 600mm apart.

The space either side need only be sufficient to allow withdrawal of the cooker for servicing and cleaning. It can be used with cabinets one side or both as well as in an angled corner setting.

It can also be used freestanding.

Adjacent side walls which project above hob level, must not be nearer to the cooker than 150mm and should be protected by heat resistant material. Any overhanging surface or cooker hood should not be nearer than 650mm.

Note: This appliance must NOT be fitted on a platform.

Moving the Cooker

Before moving your cooker, switch off at the cooker control unit, ensure that it is cool.

Open the grill door sufficiently to allow a comfortable grip on the underside front edge of the oven roof, avoiding any grill elements.

Radio Interference

This appliance conforms to EN 55014 regarding suppression of radio and television interference.

Note: Take care in moving the cooker as it is heavy.Take care to ensure that any floor covering is not damaged.

4

Page 3 Page 5
Page 4
Image 4
Indesit KD6C35, KT6C3, KDP60C S Installation, Mains Connection, Siting the Cooker, Moving the Cooker, Radio Interference
Page 3 Page 5

KD6C35, KDP60, KD6C35W S, KDP60C S, KT6C3 specifications

Indesit, a well-known brand in the home appliance sector, offers a range of cookers that cater to various culinary needs. Among their popular models are the Indesit KDP60, KD6C35, and KT6CE, each equipped with features and technologies that enhance cooking experiences.

Starting with the Indesit KDP60, this model is a freestanding dual fuel cooker, combining the precision of gas hobs with the reliability of an electric oven. One of its standout features is the large 60 cm wide design, allowing ample space for cooking multiple dishes simultaneously. The KDP60 is equipped with a four-burner gas hob, featuring different burner sizes to suit various cooking methods – from simmering sauces to rapidly boiling water. The electric oven boasts a generous capacity, ideal for baking, roasting, and grilling. With its Easy Clean enamel interior, maintaining cleanliness is convenient, while the built-in grill function adds versatility for a variety of dishes.

Next up is the Indesit KD6C35, a gas cooker that promises efficient cooking backed by essential features. This model includes a double oven layout, providing a main oven and a secondary oven, which is particularly advantageous for multi-course meals. The KD6C35 features a modern design with a sleek finish. The hob consists of four gas burners, delivering a range of heat options. Moreover, it includes a grill compartment, allowing users to achieve that perfect grilled finish on their favorite dishes. The creation of the KD6C35 emphasizes reliability and ease of use, making it an excellent choice for everyday cooking.

Lastly, the Indesit KT6CE brings a unique electric option to the mix. This model stands out with its ceramic hob, offering a smooth cooking surface that is easy to clean and provides even heating. The KT6CE features four cooking zones, allowing for efficient multitasking in the kitchen. Its spacious oven caters to a variety of cooking methods, ensuring meals can be prepared with precision. With built-in safety features, including child lock and automatic shutdown, this cooker emphasizes health and safety as essential components of the cooking process.

Collectively, the Indesit KDP60, KD6C35, and KT6CE represent a blend of functionality, style, and convenience. Each model showcases technologies that improve energy efficiency while delivering reliable performance tailored to meet the diverse needs of modern kitchens. Whether you prefer gas or electric, Indesit has a cooker that will elevate your culinary adventures.
Top Page Image Contents