Installation

 

! Before placing your new appliance into operation

GB

please read these operating instructions carefully. They

 

 

contain important information for safe use, for installation

 

 

and for care of the appliance.

 

! Please keep these operating instructions for future

 

reference. Pass them on to possible new owners of the

 

appliance.

Positioning and connection

Positioning

1. Place the appliance in a well-ventilated humidity-free room.

2. Do not obstruct the rear fan grills. The compressor and condenser give off heat and require good ventilation to operate correctly and save energy.

3. Leave a space of at least 10 cm between the top part of the appliance and any furniture above it, and at least 5 cm between the sides and any furniture/side walls.

4. Ensure the appliance is away from any sources of heat (direct sunlight, electric stove, etc.).

5. In order to maintain the correct distance between the appliance and the wall behind it, fit the spacers supplied in the installation kit, following the instructions provided.

Levelling

1.Install the appliance on a level and rigid floor.

2.If the floor is not perfectly horizontal, adjust the refrigerator by tightening or loosening the rear feet.

Electrical connections

After the appliance has been transported, carefully place it vertically and wait at least 3 hours before connecting it to the electricity mains. Before inserting the plug into the electrical socket ensure the following:

The appliance is earthed and the plug is compliant with the law.

The socket can withstand the maximum power of the appliance, which is indicated on the data plate located on the bottom left side of the fridge (e.g. 150 W).

The voltage must be in the range between the values indicated on the data plate located on the bottom left side (e.g. 220-240V).

The socket is compatible with the plug of the appliance.

If the socket is incompatible with the plug, ask an authorised technician to replace it (see Assistance). Do not use extension cords or multiple sockets.

!Once the appliance has been installed, the power supply cable and the electrical socket must be easily accessible.

!The cable must not be bent or compressed.

!The cable must be checked regularly and replaced by authorised technicians only (see Assistance).

!The manufacturer declines any liability should these safety measures not be observed.

WARNING:

THIS APPLIANCE MUST BE EARTHED.

Replacing fuse covers:

When replacing a faulty fuse, a 13amp ASTA approved fuse to BS 1362 should always be used and the fuse cover re-fitted.

If the fuse cover is lost, the plug must not be used until a replacement is obtained.

Replacement fuse covers:

If a replacement fuse cover is fitted, it must be of the correct colour as indicated by the coloured marking or the colour that is embossed in words on the base of the plug.

Removing the plug

If your appliance has a non-rewireable moulded plug and you should wish to remove it to add a longer cable or to re-route the mains cable through partitions, units etc. please ensure that either:

- The plug is replaced by a fused 13amp re- wireable plug bearing the BSI mark of approval.

or

-The mains cable is wired directly into a 13amp cable outlet, controlled by a switch (in compliance with BS 5733) which is accessible without moving the appliance.

Disposing of the plug

Cut off and dispose of the supplied plug if it does not fit your socket. The cable should be cut as close as possible to the moulded plug.

Remove the fuse.

WARNING:

To avoid a shock hazard do not insert the discarded plug into a socket anywhere else.

2

Page 2
Image 2
Indesit PBAA 34 NF D (UK) operating instructions Installation, Positioning and connection

PBAA 34 NF D (UK) specifications

The Indesit PBAA 34 NF D (UK) is a highly functional and versatile refrigerator designed to meet the needs of modern households. This appliance combines stylish design with practical features, making it an ideal addition to any kitchen.

One of the standout characteristics of the Indesit PBAA 34 NF D is its impressive capacity. With a total gross space of around 340 liters, it offers ample room for all your food storage needs. The refrigerator compartment is spacious, allowing you to organize your groceries effectively, while the freezer section provides sufficient space for frozen items, which is crucial for meal planning and bulk buying.

The appliance is equipped with No Frost technology in both the fridge and freezer sections. This innovative feature prevents the build-up of frost and ice, which means no more manual defrosting is required. This ensures the appliance operates efficiently, maintains optimal temperature levels, and promotes longer food preservation, keeping your groceries fresher for longer.

Energy efficiency is another key benefit of the Indesit PBAA 34 NF D. It boasts an energy rating of A+, which means it consumes less electricity compared to lower-rated models, translating into savings on your energy bills. The appliance is designed for minimal environmental impact, making it a responsible choice for eco-conscious consumers.

The Indesit PBAA 34 NF D also includes adjustable shelving, allowing you to customize the interior space based on your specific storage needs. The spill-proof glass shelves are easy to clean, helping to maintain hygiene standards in your kitchen. Additionally, the fresh food drawer is designed to keep fruits and vegetables at their ideal humidity levels, extending shelf life and preserving taste.

This model also features a reversible door, which gives you flexibility in placement and installation. Whether your kitchen layout is compact or more spacious, the Indesit PBAA 34 NF D can be adapted to fit seamlessly into your space.

Overall, the Indesit PBAA 34 NF D (UK) stands out for its excellent blend of practicality, efficiency, and convenience. With its spacious interiors, advanced No Frost technology, and user-friendly design, it is an excellent choice for families and individuals looking for a reliable and stylish refrigeration solution.