Installation and safety instructions
Read this manual carefully.
Read the safety warnings and operational
instructions carefully prior to operating your
refrigerator.
Always keep this manual ready.
Always keep this manual ready to use as a quick reference in case of possible troubles that may arise during the operation of your refrigerator.
Obey the warnings.
Obey all the warnings on the refrigerator and within the operational instructions.
Follow the instructions.
All instructions that are mentioned in the Owner's Manual shall be followed and applied during operating and using the appliance.
Carry out the procedures listed below, after unpacking the refrigerator. Call the Indesit Authorized Service in case of any possible problem that you may face.
1.Install all shelves and accessories in
their proper places, since they are packed together to prevent possible damage during transportation.
2.Dust may accumulate on your refrigerator and its accessories during packing and
transportation. First, clean the interior and accessories of your refrigerator with a baking soda solution and lukewarm water. (One
3.The lamps provided for the fridge
compartment must light whenever the door of the refrigerator is opened.
4.Turn the freezer compartment button to
"MAX" position and allow the refrigerator to operate unloaded for a few hours. The
fridge and freezer compartments will be cooled during this period.
5.Prior to use, let the refrigerator run for
a few hours; then place the food.
6.Avoid placing the refrigerator near heat
sources and direct sunlight. Heat may adversely effect the plastic and electrical components of your refrigerator. Therefore, never place the appliance in the vicinity of heat sources like stoves, radiator etc. Nor expose it to direct sunlight.
7.Position the appliance in such a way that you can access the socket where it is plugged in.
8.When placing your refrigerator, allow at least a 5 cm clearance on the sides and
2 cm from the
9.For your own safety, use grounded plug in operating the appliance. Consult a
qualified electrician if the plug is not grounded or if the socket does not fit your household electrical installation. The
manufacturer is free of any
responsibility due to any damage
or loss resulting from ungrounded
operation.
10.Ensure that the power supply voltage
complies with the figures stated on the tag inside the fridge compartment.
The operational voltage of your refrigerator is 10 Amperes. Connect the power cord to a grounded plug bearing a current rate of 10 Amperes.
11.At the end of the functional life of your appliance containing cyclopentane gas in the insulation foam and perhaps gas R600a (isobutane) in the refrigeration circuit the latter should made safe before
being sent to the dump.
For this operation, please contact your dealer or the Local Organisation in charge of waste disposal.
3