Indesit SAN 300, SAAN 300, SAN 400 S manual Stability bracket, Models SAN400 and SAN400S only

GB	Stability bracket
	(Models SAN400 and SAN400S only):
	WARNING: To prevent the fridge from tilting forwards, it
	must be held in place with the stability bracket supplied.
	This is the responsibility of the customer.

Fixed to the floor or wall at the rear of the fridge, the stability bracket hooks onto the compressor mounting plate holding the fridge secure.

The stability bracket must be installed securely in accordance with these instructions BEFORE using the fridge.

Note: The fridge is heavy so care must be taken when moving it.

21Position the fridge in its chosen location.

Looking from the front of the fridge, mark the position

3of the left hand panel.

Move the fridge far enough away to get clear access 4.to the back wall.

In order to clear components on the compressor mounting plate, the stability bracket must be positioned on the floor between 100 - 200mm to the

5right of the left hand panel mark.

Mark and drill the fixing holes and insert suitable 6.fixings to hold the bracket firm.

Carefully re-position the fridge. Make sure that the compressor mounting plate locates into the stability bracket.

Position stability bracket 100 - 200mm away from left hand panel mark.

Position of left

hand panel

4