Installation

￿ This instruction manual should be kept in a safe

GB

place for future reference. If the appliance is sold,

 

 

transferred or moved, make sure that the instruction

 

manual remains with the machine so that the new

 

owner is able to familiarise himself/herself with its

 

operation and features.

 

￿ Read these instructions carefully: they contain vital

 

information relating to the safe installation and

 

operation of the appliance.

 

Unpacking and levelling

 

Unpacking

1.Unpack the washing machine.

2.Make sure that the machine has not been damaged during the transportation process. If it has been damaged, contact the retailer and do not proceed any further with the installation process.

3. Remove the 4 protective screws (used during transportation) and the rubber washer with the corresponding spacer, located on the rear part of the appliance (see figure).

4.Close off the holes using the plastic plugs provided.

5.Keep all the parts in a safe place: they will be needed again if the washing machine is moved to another location.

￿Packaging materials should not be used as toys for children.

Levelling

Your machine may make a considerable amount of noise if the two front feet have not been adjusted correctly.

1.Install the washing machine on a flat and sturdy floor, without placing it against walls, cabinets or other furniture.

2. If the floor is not perfectly level, compen- sate for any unevenness by tightening or loosening the adjustable front feet (see figure); the angle of inclination, measured in relation to the worktop, must not exceed 2°.

Levelling the machine correctly will provide it with stability, help to avoid vibrations and excessive noise and prevent it from shifting while it is operating. If it is placed on carpet or a rug, adjust the feet in such a way as to allow a sufficient ventilation space underneath the machine.

Connecting the electricity and water supplies

Connecting the water inlet hose

1. Insert seal A into the end of the inlet hose and screw the latter onto a cold water tap with a 3/4 gas threaded opening

A

(see figure).

 

 

Before performing the

 

connection, allow the

 

water to run freely until it

 

is perfectly clear.

2. Connect the inlet hose to the machine by screwing it onto the cold water inlet of the appliance, which is situated on the top right- hand side of the rear part of the appliance(see figure).

3. Make sure that the hose is not folded over or bent.

￿The water pressure at the tap must fall within the values indicated in the Technical details table (see next page).

￿If the inlet hose is not long enough, contact a specialised shop or an authorised technician.

2

Page 1 Page 3
Page 2
Image 2
Indesit SIXL 125 S manual Installation, Unpacking and levelling, Connecting the electricity and water supplies
Page 1 Page 3

SIXL 125 S specifications

The Indesit SIXL 125 S is a standout appliance in the world of washing machines, renowned for its efficiency, impressive functionalities, and user-friendly features. Designed with modern households in mind, this washing machine delivers excellent performance while maintaining energy efficiency.

One of the key features of the Indesit SIXL 125 S is its generous 7 kg load capacity. This makes it ideal for families, allowing you to wash larger loads in a single cycle and save both time and energy. Additionally, with a spin speed of up to 1200 RPM, it ensures that clothes emerge cleaner and drier, reducing the time required for subsequent drying.

Equipped with a variety of washing programs, this model caters to diverse fabric types and washing requirements. From cottons and synthetics to delicate items, the Indesit SIXL 125 S boasts multiple settings that ensure optimal care for your garments. The rapid wash cycle is particularly noteworthy, allowing you to clean lightly soiled items in as little as 30 minutes, which is a great benefit when you’re in a hurry.

The washing machine also incorporates advanced technologies, such as the "Push & Wash" function. With just a simple press of a button, users can initiate a combined wash and dry cycle that takes the guesswork out of laundry days. This feature is particularly useful for those who prefer a straightforward approach, providing a quick solution for common chores.

Energy efficiency is another highlight of the Indesit SIXL 125 S. With a rating of A+, it helps in reducing energy consumption, contributing to lower electricity bills and a smaller environmental footprint. This characteristic makes it an appealing choice for eco-conscious consumers looking to make sustainable choices in their home appliances.

The design of the Indesit SIXL 125 S is both practical and stylish, featuring a sleek white finish that fits seamlessly into any laundry space. Its user-friendly digital display simplifies the selection of programs and settings, ensuring that even those who are not tech-savvy can operate it without difficulty.

In summary, the Indesit SIXL 125 S combines capacity, efficiency, and advanced technology to provide an effective washing solution for modern households. With its thoughtful features and eco-friendly design, it stands as a reliable choice for anyone seeking a high-quality washing machine.
Top Page Image Contents